[PATCH 0/4] arm64: dts: ti: Add support for AM62A family of SoCs

[Vignesh Raghavendra]

This series adds basic boot support for AM62A SoCs with UART, MMC/SD and
GPIO support on AM62A SK EVM

Bootlog: https://gist.github.com/r-vignesh/f94d274f73e734526ab589d71ef2e41a
Tech Ref manual: https://www.ti.com/lit/zip/spruj16
Schematics: https://www.ti.com/lit/zip/sprr459

Vignesh Raghavendra (4):
  dt-bindings: arm: ti: Add bindings for AM62A7 SoC
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62A
  arm64: dts: ti: Introduce AM62A7 family of SoCs
  arm64: dts: ti: Add support for AM62A7-SK

 .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi     | 298 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi      |  39 +++
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi   |  54 ++++
 arch/arm64/boot/dts/ti/k3-am62a.dtsi          | 122 +++++++
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       | 224 +++++++++++++
 arch/arm64/boot/dts/ti/k3-am62a7.dtsi         | 103 ++++++
 include/dt-bindings/pinctrl/k3.h              |   2 +
 9 files changed, 850 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7.dtsi

-- 
2.25.1