[PATCH] ARM: dts: turris-omnia: Add switch port 6 node

[Andrew Lunn]

On Thu, Aug 25, 2022 at 02:21:02PM +0200, Pali Rohár wrote:
> Switch port 6 is connected to eth0, so add appropriate device tree node for it.
> 
> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
> Signed-off-by: Pali Rohár <pali at kernel.org>
> ---
>  arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> index f655e9229d68..8215ffb6a795 100644
> --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
> +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> @@ -463,7 +463,17 @@
>  				};
>  			};
>  
> -			/* port 6 is connected to eth0 */
> +			ports at 6 {
> +				reg = <6>;
> +				label = "cpu";
> +				ethernet = <&eth0>;
> +				phy-mode = "rgmii-id";
> +
> +				fixed-link {
> +					speed = <1000>;
> +					full-duplex;
> +				};
> +			};

Hi Pali

I've not been following Vladimirs work on multiple CPU ports. Is it
clearly defined, both for old and new kernels, what happens where
there are multiple CPU ports defined?

      Andrew