[PATCH 1/2] arm64: dts: rk3399-puma: Remove 'enable-active-low'

[Fabio Estevam]

The 'enable-active-low' property is not a valid one. 

Only 'enable-active-high' is valid, and when this property is absent
the gpio regulator will act as active low by default.

Remove the invalid 'enable-active-low' property.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index b1ac3a89f259..aa3e21bd6c8f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -62,7 +62,6 @@ vcc3v3_sys: vcc3v3-sys {
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";
-- 
2.25.1