[PATCH -next 3/3] clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err_probe() helper

[Yang Yingliang]

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.

Signed-off-by: Yang Yingliang <yangyingliang at huawei.com>
---
 drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
index 575ae4ccc65f..a0fb0da8f356 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
@@ -101,12 +101,9 @@ static int sun9i_a80_usb_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	/* The bus clock needs to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
-- 
2.25.1