[PATCH -next 2/3] clk: sunxi-ng: ccu-sun9i-a80-de: Use dev_err_probe() helper

[Yang Yingliang]

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.

Signed-off-by: Yang Yingliang <yangyingliang at huawei.com>
---
 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
index f2fe0e1cc3c0..1d8b1ae1619d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
@@ -213,21 +213,14 @@ static int sun9i_a80_de_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rstc)) {
-		ret = PTR_ERR(rstc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Couldn't get reset control: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rstc),
+				     "Couldn't get reset control\n");
 
 	/* The bus clock needs to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
-- 
2.25.1