[PATCH v6 2/6] dt-bindings: media: sun6i-a31-csi: Add ISP output port

[Laurent Pinchart]

Hi Paul,

Thank you for the patch.

On Fri, Aug 26, 2022 at 08:41:40PM +0200, Paul Kocialkowski wrote:
> Some Allwinner devices come with an Image Signal Processor (ISP) that
> allows processing camera data to produce good-looking images,
> especially from raw bayer representations.
> 
> The ISP does not have a dedicated capture path: it is fed directly by
> one of the CSI controllers, which can be selected at run-time.
> 
> Represent this possibility as a graph connection between the CSI
> controller and the ISP in the device-tree bindings.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> Acked-by: Rob Herring <robh at kernel.org>
> ---
>  .../devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml    | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> index 8551c4a711dc..54eb80e517e3 100644
> --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> @@ -73,6 +73,10 @@ properties:
>          $ref: /schemas/graph.yaml#/properties/port
>          description: MIPI CSI-2 bridge input port
>  
> +      port at 2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: ISP output port
> +

I'd write "Output port to the ISP" to make it clearer.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

>      anyOf:
>        - required:
>            - port at 0

-- 
Regards,

Laurent Pinchart