[PATCH v3 1/2] dt-bindings: edac: Add bindings for Xilinx ZynqMP OCM

[Sai Krishna Potthuri]

From: Shubhrajyoti Datta <shubhrajyoti.datta at xilinx.com>

Add bindings for Xilinx ZynqMP OCM controller.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta at xilinx.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri at amd.com>
---
 .../xlnx,zynqmp-ocmc-1.0.yaml                 | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml

diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
new file mode 100644
index 000000000000..ca9fc747bf4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynqmp OCM(On-Chip Memory) Controller
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta at amd.com>
+  - Sai Krishna Potthuri <sai.krishna.potthuri at amd.com>
+
+description: |
+  The OCM supports 64-bit wide ECC functionality to detect multi-bit errors
+  and recover from a single-bit memory fault.On a write, if all bytes are
+  being written, the ECC is generated and written into the ECC RAM along with
+  the write-data that is written into the data RAM. If one or more bytes are
+  not written, then the read operation results in an correctable error or
+  uncorrectable error.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ocmc-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller at ff960000 {
+      compatible = "xlnx,zynqmp-ocmc-1.0";
+      reg = <0xff960000 0x1000>;
+      interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+    };
-- 
2.17.1