[PATCH] arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo

[Marek Vasut]

The CPLD_Dn GPIO assignment between SoM and CPLD has now been clarified
in schematic and the assignment is reversed. Update the DT to match the
hardware.

Fixes: 510c527b4ff57 ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Fabio Estevam <festevam at denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Shawn Guo <shawnguo at kernel.org>
To: linux-arm-kernel at lists.infradead.org
---
 arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
index c97f4e06ae5f3..32f6f2f50c10c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -152,11 +152,11 @@ &gpio4 {
 	 * CPLD_reset is RESET_SOFT in schematic
 	 */
 	gpio-line-names =
-		"CPLD_D[1]", "CPLD_int", "CPLD_reset", "",
-		"", "CPLD_D[0]", "", "",
-		"", "", "", "CPLD_D[2]",
-		"CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]",
-		"CPLD_D[7]", "", "", "",
+		"CPLD_D[6]", "CPLD_int", "CPLD_reset", "",
+		"", "CPLD_D[7]", "", "",
+		"", "", "", "CPLD_D[5]",
+		"CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
+		"CPLD_D[0]", "", "", "",
 		"", "", "", "",
 		"", "", "", "KBD_intK",
 		"", "", "", "";
-- 
2.35.1