[RFC PATCH v2 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings

[Krzysztof Kozlowski]

On 20/08/2022 11:29, Dario Binacchi wrote:
> Add documentation of device tree bindings for the STM32 basic extended
> CAN (bxcan) controller.
> 
> Signed-off-by: Dario Binacchi <dariobin at libero.it>
> Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
> 
> ---
> 
> Changes in v2:
> - Change the file name into 'st,stm32-bxcan-core.yaml'.
> - Rename compatibles:
>   - st,stm32-bxcan-core -> st,stm32f4-bxcan-core
>   - st,stm32-bxcan -> st,stm32f4-bxcan
> - Rename master property to st,can-master.
> - Remove the status property from the example.
> - Put the node child properties as required.
> 
>  .../bindings/net/can/st,stm32-bxcan.yaml      | 136 ++++++++++++++++++
>  1 file changed, 136 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
> new file mode 100644
> index 000000000000..288631b5556d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
> @@ -0,0 +1,136 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/can/st,stm32-bxcan.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics bxCAN controller
> +
> +description: STMicroelectronics BxCAN controller for CAN bus
> +
> +maintainers:
> +  - Dario Binacchi <dario.binacchi at amarulasolutions.com>
> +
> +allOf:
> +  - $ref: can-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - st,stm32f4-bxcan-core
> +
> +  reg:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  clocks:
> +    description:
> +      Input clock for registers access
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - resets
> +  - clocks
> +  - '#address-cells'
> +  - '#size-cells'
> +
> +patternProperties:

No improvements here, so my comment stay. Please fix it.


> +  "^can@[0-9]+$":
> +    type: object
> +    description:
> +      A CAN block node contains two subnodes, representing each one a CAN
> +      instance available on the machine.

I still do not understand why you need children. You did not CC me on
driver change, so difficult to say. You did not describe the parent
device - there is no description. Why do you need parent device at all?
This looks like some driver-driven-bindings instead of just real
hardware description.

Best regards,
Krzysztof