[linux][PATCH v2 2/2] dts: arm: at91: Add SAMA5D3-EDS Board

[Nicolas Ferre]

Hi Jerry,

On 23/08/2022 at 09:28, Claudiu Beznea - M18063 wrote:
> On 22.08.2022 21:13, Jerry Ray wrote:
>> The SAMA5D3-EDS board is an Ethernet Development Platform allowing for
>> evaluating many Microchip ethernet switch and PHY products.  Various
>> daughter cards can connect up via an RGMII connector or an RMII connector.
>>
>> The EDS board is not intended for stand-alone use and has no ethernet
>> capabilities when no daughter board is connected.  As such, this device
>> tree is intended to be used with a DT overlay defining the add-on board.
>> To better ensure consistency, some items are defined here as a form of
>> documentation so that all add-on overlays will use the same terms.
>>
>> Google search keywords: "Microchip SAMA5D3-EDS"
>>
>> Signed-off-by: Jerry Ray <jerry.ray at microchip.com>
>> ---
>> v1->v2:
>>   - Modified the compatible field in the device tree to reflect Microchip
>>     Ethernet Development System Board.
>> ---
>>   arch/arm/boot/dts/at91-sama5d3_eds.dts | 314 +++++++++++++++++++++++++
>>   1 file changed, 314 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/at91-sama5d3_eds.dts
>>
>> diff --git a/arch/arm/boot/dts/at91-sama5d3_eds.dts b/arch/arm/boot/dts/at91-sama5d3_eds.dts
>> new file mode 100644
> 
> You have to add this file to Makefile to be compiled.
> 
>> index 000000000000..626f7bbe0164
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91-sama5d3_eds.dts
>> @@ -0,0 +1,314 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later

I would prefer that we also allow MIT:

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

>> +/*
>> + * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
>> + *    Development System board.
>> + *
>> + *  Copyright (C) 2022 Microchip Technology, Inc. and its subsidiarie >> + *               2022 Jerry Ray <jerry.ray at microchip.com>

Let's have only Microchip as a copyright holder and add yourself as 
Author like:

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
  * Brief description goes here.
  *
  * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
  *
  * Author: John Doe <john.doe at microchip.com>
  *
  * Longer description goes here.
  * Even on multiple lines.
  */

>> + */
>> +/dts-v1/;
>> +#include "sama5d36.dtsi"
>> +
>> +/ {
>> +       model = "SAMA5D3 Ethernet Development System";
>> +       compatible = "microchip,sama5d3-eds", "atmel,sama5d3", "atmel,sama5";
>> +

[..]

>> +&pinctrl {
>> +       board {
>> +               pinctrl_i2c0_pu: i2c0_pu {
>> +                       atmel,pins =
>> +                               <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
>> +                               <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
>> +               };
>> +
>> +               pinctrl_i2c2_pu: i2c2_pu {
>> +                       atmel,pins =
>> +                               <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
>> +                               <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
>> +               };
>> +
>> +               pinctrl_key_gpio: key_gpio_0 {
>> +                       atmel,pins =
>> +                               <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
>> +               };
>> +
>> +               pinctrl_mmc0_cd: mmc0_cd {
>> +                       atmel,pins =
>> +                               <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
>> +               };
>> +
>> +               pinctrl_spi0_cs: spi0_cs_default {
>> +                       atmel,pins =
>> +                               <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
>> +                                AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
>> +               };
>> +
>> +               pinctrl_spi1_cs: spi1_cs_default {
>> +                       atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
>> +                                     AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
>> +               };
>> +
>> +               pinctrl_usba_vbus: usba_vbus {
>> +                       atmel,pins =
>> +                               <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
>> +               };
>> +
>> +               pinctrl_usb_default: usb_default {
>> +                       atmel,pins =
>> +                               <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
>> +                                AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
>> +               };
>> +
>> +               pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
>> +                       atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
>> +               };
>> +
>> +               /* Reserved for reset signal to the RGMII connector. */
>> +               pinctrl_rgmii_rstn: rgmii_rstn {

It's better if you sort these nodes alphabetically: please rearrange the 
end of this list of pinctrl nodes.

>> +                       atmel,pins =
>> +                               <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
>> +               };
>> +
>> +               /* Reserved for an interrupt line from the RMII and RGMII connectors. */
>> +               pinctrl_spi_irqn: spi_irqn {
>> +                       atmel,pins =
>> +                               <AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
>> +               };
>> +
>> +               /* Reserved for VBUS fault interrupt. */
>> +               pinctrl_vbusfault_irqn: vbusfault_irqn {
>> +                       atmel,pins =
>> +                               <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
>> +               };
>> +       };
>> +};

Thanks for your patch Jerry. Best regards,
   Nicolas


-- 
Nicolas Ferre