[PATCH v6 06/17] dt-bindings: mfd: amd,pensando-elbasr: Add AMD Pensando Elba System Resource chip

[Rob Herring]

On Sat, Aug 20, 2022 at 12:57:39PM -0700, Brad Larson wrote:
> From: Brad Larson <blarson at amd.com>
> 
> Add support for the AMD Pensando Elba SoC System Resource chip
> using the SPI interface.  The Elba SR is a Multi-function Device
> supporting device register access using CS0, smbus interface for
> FRU and board peripherals using CS1, dual Lattice I2C masters for
> transceiver management using CS2, and CS3 for flash access.
> 
> Signed-off-by: Brad Larson <blarson at amd.com>
> ---
>  .../bindings/mfd/amd,pensando-elbasr.yaml     | 97 +++++++++++++++++++
>  1 file changed, 97 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> new file mode 100644
> index 000000000000..ded347c3352c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/amd,pensando-elbasr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMD Pensando Elba SoC Resource Controller bindings
> +
> +description: |
> +  AMD Pensando Elba SoC Resource Controller is a set of
> +  miscellaneous control/status registers accessed on CS0,
> +  a designware i2c master/slave on CS1, a Lattice rd1173
> +  dual i2c master on CS2, and flash on CS3.  The /dev interfaces
> +  created are /dev/pensr0.<CS>.  Hardware reset of the eMMC

/dev is a Linux thing and not relevant for the bindings.

> +  is implemented by a sub-device reset-controller which accesses
> +  a CS0 control register.
> +
> +maintainers:
> +  - Brad Larson <blarson at amd.com>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - amd,pensando-elbasr
> +
> +  spi-max-frequency:
> +    description: Maximum SPI frequency of the device in Hz.

No need for generic descriptions of common properties.
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - spi-max-frequency
> +
> +patternProperties:
> +  '^reset-controller@[a-f0-9]+$':
> +    $ref: /schemas/reset/amd,pensando-elbasr-reset.yaml
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        num-cs = <4>;
> +
> +        sysc: system-controller at 0 {
> +            compatible = "amd,pensando-elbasr";
> +            reg = <0>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            spi-max-frequency = <12000000>;
> +
> +            rstc: reset-controller at 0 {
> +                compatible = "amd,pensando-elbasr-reset";
> +                reg = <0>;

What does 0 represent here? A register address within 'elbasr' device?

Why do you need a child node for this? Are there other sub-devices and 
your binding is incomplete? Just put '#reset-cells' in the parent.

> +                #reset-cells = <1>;
> +            };
> +        };
> +
> +        i2c1: i2c at 1 {
> +            compatible = "amd,pensando-elbasr";

You can't reuse the same compatible to represent different things.


> +            reg = <1>;
> +            spi-max-frequency = <12000000>;
> +        };
> +
> +        i2c2: i2c at 2 {
> +            compatible = "amd,pensando-elbasr";

As this is a Lattice RD1173, I would expect a compatible based on that.


> +            reg = <2>;
> +            spi-max-frequency = <12000000>;
> +            interrupt-parent = <&porta>;
> +            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +        };
> +
> +        flash at 3 {
> +            compatible = "amd,pensando-elbasr";

Isn't this a flash device?

> +            reg = <3>;
> +            spi-max-frequency = <12000000>;
> +        };
> +    };
> +
> +...
> -- 
> 2.17.1
> 
>