[PATCH devicetree 3/3] arm64: dts: ls1028a: enable swp5 and eno3 for all boards

[Vladimir Oltean]

In order for the LS1028A based boards to benefit from support for
multiple CPU ports, the second DSA master and its associated CPU port
must be enabled in the device trees. This does not change the default
CPU port from the current port 4.

Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
 .../dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts   | 8 ++++++++
 .../boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts  | 8 ++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts         | 8 ++++++++
 3 files changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 52ef2e8e5492..73eb6061c73e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -59,6 +59,10 @@ &enetc_port2 {
 	status = "okay";
 };
 
+&enetc_port3 {
+	status = "okay";
+};
+
 &i2c3 {
 	eeprom at 57 {
 		compatible = "atmel,24c32";
@@ -107,6 +111,10 @@ &mscc_felix_port4 {
 	status = "okay";
 };
 
+&mscc_felix_port5 {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index 37c20cb6c152..113b1df74bf8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -39,6 +39,10 @@ &enetc_port2 {
 	status = "okay";
 };
 
+&enetc_port3 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -62,3 +66,7 @@ &mscc_felix_port1 {
 &mscc_felix_port4 {
 	status = "okay";
 };
+
+&mscc_felix_port5 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 7285bdcf2302..e33725c60169 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -151,6 +151,10 @@ &enetc_port2 {
 	status = "okay";
 };
 
+&enetc_port3 {
+	status = "okay";
+};
+
 &esdhc {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
@@ -281,6 +285,10 @@ &mscc_felix_port4 {
 	status = "okay";
 };
 
+&mscc_felix_port5 {
+	status = "okay";
+};
+
 &optee {
 	status = "okay";
 };
-- 
2.34.1