[PATCH devicetree 1/3] arm64: dts: ls1028a: move DSA CPU port property to the common SoC dtsi

[Vladimir Oltean]

Since the CPU port 4 of the switch is hardwired inside the SoC to go to
the enetc port 2, this shouldn't be something that the board files need
to set (but whether that CPU port is used or not is another discussion).

So move the DSA "ethernet" property to the common dtsi.

Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
 .../boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts     | 1 -
 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts  | 1 -
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts                | 1 -
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi                   | 1 +
 4 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 6b575efd84a7..52ef2e8e5492 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -104,7 +104,6 @@ &mscc_felix_port3 {
 };
 
 &mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index 330e34f933a3..37c20cb6c152 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -60,6 +60,5 @@ &mscc_felix_port1 {
 };
 
 &mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index e0cd1516d05b..7285bdcf2302 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -278,7 +278,6 @@ &mscc_felix_port3 {
 };
 
 &mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 5627dd7734f3..3da105119d82 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1157,6 +1157,7 @@ mscc_felix_port4: port at 4 {
 						reg = <4>;
 						phy-mode = "internal";
 						status = "disabled";
+						ethernet = <&enetc_port2>;
 
 						fixed-link {
 							speed = <2500>;
-- 
2.34.1