[PATCH v3 1/4] regulator: dt-bindings: Add Allwinner D1 LDOs

[Krzysztof Kozlowski]

On 17/08/2022 11:15, Samuel Holland wrote:

>>> +
>>> +properties:
>>> +  compatible:
>>> +    enum:
>>> +      - allwinner,sun20i-d1-analog-ldos
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  nvmem-cells:
>>> +    items:
>>> +      - description: NVMEM cell for the calibrated bandgap reference trim value
>>> +
>>> +  nvmem-cell-names:
>>> +    items:
>>> +      - const: bg_trim
>>> +
>>> +patternProperties:
>>> +  "^(a|hp)ldo$":
>>> +    type: object
>>> +    $ref: regulator.yaml#
>>> +    unevaluatedProperties: false
>>> +
>>> +required:
>>> +  - compatible
>>> +  - reg
>>> +  - nvmem-cells
>>> +  - nvmem-cell-names
>>> +
>>> +unevaluatedProperties: false
>>> +
>>> +examples:
>>> +  - |
>>> +    audio-codec at 2030000 {
>>> +        compatible = "simple-mfd", "syscon";
>>
>> This cannot be on its own. Both require device specific compatible.
> 
> Again, the device-specific compatible does not exist, because the binding for
> the audio codec has not been written (and it will be quite nontrivial).
> 
> So I can:
>   1) Leave the example as-is until the audio codec binding gets written,
>      and fill in the specific compatible at that time.
>   2) Remove the example, with the reasoning that the example really
>      belongs with the MFD parent (like for the other regulator). Then
>      there will be no example until the audio codec binding is written.
>   3) Drop the analog LDOs from this series entirely, and some parts
>      of the SoC (like thermal monitoring) cannot be added to the DTSI
>      until the audio codec binding is written.
> 
> What do you think?

How about just removing the audio-codec node? The schema is about
regulators, not audio-codec.

OTOH, if you have parent device schema, you could put the example only
there. But as I understand, you don't have, right?

> 
> The same question applies for the D1 SoC DTSI, where I use this same construct.

This is not correct and should be fixed. Either you add the schema with
compatible or please drop the device node from the DTSI.

> 
> (And technically this does validate with the current schema.)
> 
>>> +        reg = <0x2030000 0x1000>;
>>> +        ranges;
>>> +        #address-cells = <1>;
>>> +        #size-cells = <1>;
>>> +
>>> +        regulators at 2030348 {
>>> +            compatible = "allwinner,sun20i-d1-analog-ldos";
>>> +            reg = <0x2030348 0x4>;
>>> +            nvmem-cells = <&bg_trim>;
>>> +            nvmem-cell-names = "bg_trim";
>>> +
>>> +            reg_aldo: aldo {
>>> +                regulator-min-microvolt = <1800000>;
>>> +                regulator-max-microvolt = <1800000>;
>>> +            };
>>> +
>>> +            reg_hpldo: hpldo {
>>> +                regulator-min-microvolt = <1800000>;
>>> +                regulator-max-microvolt = <1800000>;
>>> +            };
>>> +        };
>>> +    };
>>> +
>>> +...
>>> diff --git a/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
>>> new file mode 100644
>>> index 000000000000..e3e2810fb3d7
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
>>> @@ -0,0 +1,37 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Allwinner D1 System LDOs
>>> +
>>> +description:
>>> +  Allwinner D1 contains a pair of general-purpose LDOs which are designed to
>>> +  supply power inside and outside the SoC. They are controlled by a register
>>> +  within the system control MMIO space.
>>
>> Fix order.
>>
>>
>>> +
>>> +maintainers:
>>> +  - Samuel Holland <samuel at sholland.org>
>>> +
>>> +properties:
>>> +  compatible:
>>> +    enum:
>>> +      - allwinner,sun20i-d1-system-ldos
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +patternProperties:
>>> +  "^ldo[ab]$":
>>> +    type: object
>>> +    $ref: regulator.yaml#
>>> +    unevaluatedProperties: false
>>> +
>>> +required:
>>> +  - compatible
>>> +  - reg
>>> +
>>> +unevaluatedProperties: false
>>
>>
>> Example please.
> 
> Rob asked me to move the example to the parent binding, so I did. The example is
> added in patch 3.

Yeah, I noticed it later. It's fine.

Best regards,
Krzysztof