[PATCH v2 6/7] dt-bindings: net: dsa: mediatek,mt7530: define phy-mode for each compatible

Arınç ÜNAL arinc.unal at arinc9.com
Tue Aug 16 15:09:16 PDT 2022


On 17.08.2022 00:21, Rob Herring wrote:
> On Sat, Aug 13, 2022 at 06:44:14PM +0300, Arınç ÜNAL wrote:
>> Define acceptable phy-mode values for CPU port of each compatible device.
>> Remove relevant information from the description of the binding.
> 
> I'm not really sure this is worth the complexity just to check
> 'phy-mode'...

I can describe it on the binding description but it won't be checked on 
DT bindings. phy-mode values are significantly different between mt7530 
and mt7531 so I think it's useful to have it.

> 
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
>> ---
>>   .../bindings/net/dsa/mediatek,mt7530.yaml     | 103 ++++++++++++++++--
>>   1 file changed, 92 insertions(+), 11 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>> index a27cb4fa490f..530ef5a75a2f 100644
>> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>> @@ -49,17 +49,6 @@ description: |
>>     * mt7621: phy-mode = "rgmii-txid";
>>     * mt7623: phy-mode = "rgmii";
>>   
>> -  CPU-Ports need a phy-mode property:
>> -    Allowed values on mt7530 and mt7621:
>> -      - "rgmii"
>> -      - "trgmii"
>> -    On mt7531:
>> -      - "1000base-x"
>> -      - "2500base-x"
>> -      - "rgmii"
>> -      - "sgmii"
>> -
>> -
>>   properties:
>>     compatible:
>>       oneOf:
>> @@ -177,6 +166,36 @@ allOf:
>>                           items:
>>                             - const: cpu
>>                     then:
>> +                    allOf:
>> +                      - if:
>> +                          properties:
>> +                            reg:
>> +                              const: 5
>> +                        then:
>> +                          properties:
>> +                            phy-mode:
>> +                              enum:
>> +                                - gmii
>> +                                - mii
>> +                                - rgmii
>> +
>> +                      - if:
>> +                          properties:
>> +                            reg:
>> +                              const: 6
>> +                        then:
> 
> You've restricted this to ports 5 or 6 already, so you just need an
> 'else' here. And you can then drop the 'allOf'.

Good thinking, will do.

> 
>> +                          properties:
>> +                            phy-mode:
>> +                              enum:
>> +                                - rgmii
>> +                                - trgmii
>> +
>> +                    properties:
>> +                      reg:
>> +                        enum:
>> +                          - 5
>> +                          - 6
>> +
>>                       required:
>>                         - phy-mode
>>   
>> @@ -206,6 +225,38 @@ allOf:
>>                           items:
>>                             - const: cpu
>>                     then:
>> +                    allOf:
>> +                      - if:
>> +                          properties:
>> +                            reg:
>> +                              const: 5
>> +                        then:
>> +                          properties:
>> +                            phy-mode:
>> +                              enum:
>> +                                - 1000base-x
>> +                                - 2500base-x
>> +                                - rgmii
>> +                                - sgmii
>> +
>> +                      - if:
>> +                          properties:
>> +                            reg:
>> +                              const: 6
>> +                        then:
>> +                          properties:
>> +                            phy-mode:
>> +                              enum:
>> +                                - 1000base-x
>> +                                - 2500base-x
>> +                                - sgmii
>> +
>> +                    properties:
>> +                      reg:
>> +                        enum:
>> +                          - 5
>> +                          - 6
>> +
>>                       required:
>>                         - phy-mode
>>   
>> @@ -235,6 +286,36 @@ allOf:
>>                           items:
>>                             - const: cpu
>>                     then:
>> +                    allOf:
>> +                      - if:
>> +                          properties:
>> +                            reg:
>> +                              const: 5
>> +                        then:
>> +                          properties:
>> +                            phy-mode:
>> +                              enum:
>> +                                - gmii
>> +                                - mii
>> +                                - rgmii
>> +
>> +                      - if:
>> +                          properties:
>> +                            reg:
>> +                              const: 6
>> +                        then:
>> +                          properties:
>> +                            phy-mode:
>> +                              enum:
>> +                                - rgmii
>> +                                - trgmii
>> +
>> +                    properties:
>> +                      reg:
>> +                        enum:
>> +                          - 5
>> +                          - 6
>> +
> 
> Looks like the same schema duplicated. You can put it under a '$defs'
> and reference it twice.

Great!

> 
>>                       required:
>>                         - phy-mode
>>   
>> -- 
>> 2.34.1
>>
>>



More information about the linux-arm-kernel mailing list