[PATCH v2 3/7] dt-bindings: net: dsa: mediatek,mt7530: update examples
Rob Herring
robh at kernel.org
Tue Aug 16 14:02:23 PDT 2022
On Sat, Aug 13, 2022 at 06:44:11PM +0300, Arınç ÜNAL wrote:
> Update the examples on the binding.
>
> - Add examples which include a wide variation of configurations.
> - Make example comments YAML comment instead of DT binding comment.
> - Define examples from platform to make the bindings clearer.
> - Add interrupt controller to the examples. Include header file for
> interrupt.
> - Change reset line for MT7621 examples.
> - Pretty formatting for the examples.
> - Change switch reg to 0.
> - Change port labels to fit the example, change port 4 label to wan.
> - Change ethernet-ports to ports.
Again, why?
>
> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
> ---
> .../bindings/net/dsa/mediatek,mt7530.yaml | 663 +++++++++++++-----
> 1 file changed, 502 insertions(+), 161 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 4c99266ce82a..cc87f48d4d07 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -210,144 +210,374 @@ allOf:
> unevaluatedProperties: false
>
> examples:
> + # Example 1: Standalone MT7530
> - |
> #include <dt-bindings/gpio/gpio.h>
> - mdio {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - switch at 0 {
> - compatible = "mediatek,mt7530";
> - reg = <0>;
> -
> - core-supply = <&mt6323_vpa_reg>;
> - io-supply = <&mt6323_vemc3v3_reg>;
> - reset-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
> -
> - ethernet-ports {
> +
> + platform {
> + ethernet {
Don't need these nodes.
> + mdio {
> #address-cells = <1>;
> #size-cells = <0>;
> - port at 0 {
> +
> + switch at 0 {
> + compatible = "mediatek,mt7530";
> reg = <0>;
> - label = "lan0";
> - };
>
> - port at 1 {
> - reg = <1>;
> - label = "lan1";
> - };
> + reset-gpios = <&pio 33 0>;
>
> - port at 2 {
> - reg = <2>;
> - label = "lan2";
> - };
> + core-supply = <&mt6323_vpa_reg>;
> + io-supply = <&mt6323_vemc3v3_reg>;
> +
> + ports {
'ports' is for the DT graph binding. 'ethernet-ports' is for DSA
binding. The former is allowed due to existing users. Don't add more.
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - port at 3 {
> - reg = <3>;
> - label = "lan3";
> + port at 0 {
> + reg = <0>;
> + label = "lan1";
> + };
> +
> + port at 1 {
> + reg = <1>;
> + label = "lan2";
> + };
> +
> + port at 2 {
> + reg = <2>;
> + label = "lan3";
> + };
> +
> + port at 3 {
> + reg = <3>;
> + label = "lan4";
> + };
> +
> + port at 4 {
> + reg = <4>;
> + label = "wan";
> + };
> +
> + port at 6 {
> + reg = <6>;
> + label = "cpu";
> + ethernet = <&gmac0>;
> + phy-mode = "rgmii";
> +
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + pause;
> + };
> + };
> + };
> };
> + };
> + };
> + };
>
> - port at 4 {
> - reg = <4>;
> - label = "wan";
> + # Example 2: MT7530 in MT7623AI SoC
Looks almost the same as example 1. Examples are not an enumeration of
every possible DT. Limit them to cases which are significantly
different.
> + - |
> + #include <dt-bindings/reset/mt2701-resets.h>
> +
> + platform {
> + ethernet {
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + switch at 0 {
> + compatible = "mediatek,mt7530";
> + reg = <0>;
> +
> + mediatek,mcm;
> + resets = <ðsys MT2701_ETHSYS_MCM_RST>;
> + reset-names = "mcm";
> +
> + core-supply = <&mt6323_vpa_reg>;
> + io-supply = <&mt6323_vemc3v3_reg>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + label = "lan1";
> + };
> +
> + port at 1 {
> + reg = <1>;
> + label = "lan2";
> + };
> +
> + port at 2 {
> + reg = <2>;
> + label = "lan3";
> + };
> +
> + port at 3 {
> + reg = <3>;
> + label = "lan4";
> + };
> +
> + port at 4 {
> + reg = <4>;
> + label = "wan";
> + };
> +
> + port at 6 {
> + reg = <6>;
> + label = "cpu";
> + ethernet = <&gmac0>;
> + phy-mode = "trgmii";
> +
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + pause;
> + };
> + };
> + };
> };
> + };
> + };
> + };
> +
> + # Example 3: Standalone MT7531
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + platform {
> + ethernet {
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + switch at 0 {
> + compatible = "mediatek,mt7531";
> + reg = <0>;
> +
> + reset-gpios = <&pio 54 0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + interrupt-parent = <&pio>;
> + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + label = "lan1";
> + };
> +
> + port at 1 {
> + reg = <1>;
> + label = "lan2";
> + };
> +
> + port at 2 {
> + reg = <2>;
> + label = "lan3";
> + };
> +
> + port at 3 {
> + reg = <3>;
> + label = "lan4";
> + };
>
> - port at 6 {
> - reg = <6>;
> - label = "cpu";
> - ethernet = <&gmac0>;
> - phy-mode = "trgmii";
> - fixed-link {
> - speed = <1000>;
> - full-duplex;
> + port at 4 {
> + reg = <4>;
> + label = "wan";
> + };
> +
> + port at 6 {
> + reg = <6>;
> + label = "cpu";
> + ethernet = <&gmac0>;
> + phy-mode = "2500base-x";
> +
> + fixed-link {
> + speed = <2500>;
> + full-duplex;
> + pause;
> + };
> + };
> };
> };
> };
> };
> };
>
> + # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
> - |
> - //Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4.
> -
> - ethernet {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - gmac0: mac at 0 {
> - compatible = "mediatek,eth-mac";
> - reg = <0>;
> - phy-mode = "rgmii";
> -
> - fixed-link {
> - speed = <1000>;
> - full-duplex;
> - pause;
> + #include <dt-bindings/interrupt-controller/mips-gic.h>
> + #include <dt-bindings/reset/mt7621-reset.h>
> +
> + platform {
> + ethernet {
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + switch at 0 {
> + compatible = "mediatek,mt7621";
> + reg = <0>;
> +
> + mediatek,mcm;
> + resets = <&sysc MT7621_RST_MCM>;
> + reset-names = "mcm";
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + label = "lan1";
> + };
> +
> + port at 1 {
> + reg = <1>;
> + label = "lan2";
> + };
> +
> + port at 2 {
> + reg = <2>;
> + label = "lan3";
> + };
> +
> + port at 3 {
> + reg = <3>;
> + label = "lan4";
> + };
> +
> + port at 4 {
> + reg = <4>;
> + label = "wan";
> + };
> +
> + port at 6 {
> + reg = <6>;
> + label = "cpu";
> + ethernet = <&gmac0>;
> + phy-mode = "trgmii";
> +
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + pause;
> + };
> + };
> + };
> + };
> };
> };
> + };
>
> - gmac1: mac at 1 {
> - compatible = "mediatek,eth-mac";
> - reg = <1>;
> - phy-mode = "rgmii-txid";
> - phy-handle = <&phy4>;
> + # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1
> + - |
> + #include <dt-bindings/interrupt-controller/mips-gic.h>
> + #include <dt-bindings/reset/mt7621-reset.h>
> +
> + platform {
> + pinctrl {
> + example5_rgmii2_pins: rgmii2-pins {
> + pinmux {
> + groups = "rgmii2";
> + function = "rgmii2";
> + };
> + };
No need to put this in the example. We don't put provide nodes in
the examples of the consumers. It's also incomplete and can't be
validated.
> };
>
> - mdio: mdio-bus {
> + ethernet {
> #address-cells = <1>;
> #size-cells = <0>;
More information about the linux-arm-kernel
mailing list