[PATCH v5 2/2] arm64: dts: imx8mp-msc-sm2s: Add device trees for MSC SM2S-IMX8PLUS SoM and carrier board

[Krzysztof Kozlowski]

On 16/08/2022 15:38, Martyn Welch wrote:
> Add device trees for one of a number of MSC's (parent company, Avnet)
> variants of the SM2S-IMX8PLUS system on module along with the compatible
> SM2S-SK-AL-EP1 carrier board. As the name suggests, this family of SoMs use
> the NXP i.MX8MP SoC and provide the SMARC module interface.
> 
> Signed-off-by: Martyn Welch <martyn.welch at collabora.com>

Thank you for your patch. There is something to discuss/improve.

> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> new file mode 100644
> index 000000000000..3ea822d9e58d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2022 Avnet Embedded GmbH
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mp-msc-sm2s-14N0600E.dtsi"
> +#include <dt-bindings/clock/imx8mp-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-QC6-14N0600E SoM";
> +	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
> +		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
> +		     "fsl,imx8mp";
> +};
> +
> +&flexcan1 {
> +	status = "okay";
> +};
> +
> +&flexcan2 {
> +	status = "okay";
> +};
> +
> +&usdhc2 {
> +	no-1-8-v;
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_smarc_gpio>;
> +
> +	pinctrl_smarc_gpio: smarcgpiosgrp {
> +		fsl,pins =
> +			<MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x19>, /* GPIO0 */
> +			<MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x19>, /* GPIO1 */
> +			<MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x19>, /* GPIO2 */
> +			<MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x19>, /* GPIO3 */
> +			<MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x19>, /* GPIO4 */
> +			<MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x19>, /* GPIO5 */
> +			<MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x19>, /* GPIO6 */
> +			<MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x19>, /* GPIO7 */
> +			<MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x19>, /* GPIO8 */
> +			<MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x19>, /* GPIO9 */
> +			<MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x19>, /* GPIO10 */
> +			<MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x19>, /* GPIO11 */
> +			<MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x19>, /* GPIO12 */
> +			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19>; /* GPIO13 */
> +	};
> +};
> +

No need for trailing blank line.

With this fixed:


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>


Best regards,
Krzysztof