[PATCH V2 7/7] i2c: imx-lpi2c: use bulk clk API

Peng Fan (OSS) peng.fan at oss.nxp.com
Tue Aug 16 05:55:26 PDT 2022


From: Peng Fan <peng.fan at nxp.com>

The current driver only support one clock, however LPI2C requires
two clocks: PER and IPG.

To make sure old dts could work with newer kernel, use bulk clk
API.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/i2c/busses/i2c-imx-lpi2c.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index b51ab3cad2b1..159c2dc792b1 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -94,7 +94,8 @@ enum lpi2c_imx_pincfg {
 
 struct lpi2c_imx_struct {
 	struct i2c_adapter	adapter;
-	struct clk		*clk;
+	int			num_clks;
+	struct clk_bulk_data	*clks;
 	void __iomem		*base;
 	__u8			*rx_buf;
 	__u8			*tx_buf;
@@ -207,7 +208,7 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
 
 	lpi2c_imx_set_mode(lpi2c_imx);
 
-	clk_rate = clk_get_rate(lpi2c_imx->clk);
+	clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
 	if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
 		filt = 0;
 	else
@@ -561,11 +562,12 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	strscpy(lpi2c_imx->adapter.name, pdev->name,
 		sizeof(lpi2c_imx->adapter.name));
 
-	lpi2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(lpi2c_imx->clk)) {
-		dev_err(&pdev->dev, "can't get I2C peripheral clock\n");
-		return PTR_ERR(lpi2c_imx->clk);
+	ret = devm_clk_bulk_get_all(&pdev->dev, &lpi2c_imx->clks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "can't get I2C peripheral clock, ret=%d\n", ret);
+		return ret;
 	}
+	lpi2c_imx->num_clks = ret;
 
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "clock-frequency", &lpi2c_imx->bitrate);
@@ -582,11 +584,9 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&lpi2c_imx->adapter, lpi2c_imx);
 	platform_set_drvdata(pdev, lpi2c_imx);
 
-	ret = clk_prepare_enable(lpi2c_imx->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "clk enable failed %d\n", ret);
+	ret = clk_bulk_prepare_enable(lpi2c_imx->num_clks, lpi2c_imx->clks);
+	if (ret)
 		return ret;
-	}
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
@@ -633,7 +633,7 @@ static int __maybe_unused lpi2c_runtime_suspend(struct device *dev)
 {
 	struct lpi2c_imx_struct *lpi2c_imx = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(lpi2c_imx->clk);
+	clk_bulk_disable(lpi2c_imx->num_clks, lpi2c_imx->clks);
 	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
@@ -645,7 +645,7 @@ static int __maybe_unused lpi2c_runtime_resume(struct device *dev)
 	int ret;
 
 	pinctrl_pm_select_default_state(dev);
-	ret = clk_prepare_enable(lpi2c_imx->clk);
+	ret = clk_bulk_prepare_enable(lpi2c_imx->num_clks, lpi2c_imx->clks);
 	if (ret) {
 		dev_err(dev, "failed to enable I2C clock, ret=%d\n", ret);
 		return ret;
-- 
2.37.1




More information about the linux-arm-kernel mailing list