[PATCH 2/2] ARM: dts: kirkwood: lsxl: remove first ethernet port

[Michael Walle]

Both the Linkstation LS-CHLv2 and the LS-XHL have only one ethernet
port. This has always been wrong, i.e. the board code used to set up
both ports, but the driver will play nice and return -ENODEV if the
assiciated PHY is not found. Nevertheless, it is wrong. Remove it.

Fixes: 876e23333511 ("ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes")
Signed-off-by: Michael Walle <michael at walle.cc>
---
 arch/arm/boot/dts/kirkwood-lsxl.dtsi | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 321a40a98ed2..88b70ba1c8fe 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -218,22 +218,11 @@ hdd_power: regulator at 2 {
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy at 0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy at 8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port at 0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port at 0 {
-- 
2.30.2