[PATCH] dt-bindings: pinctrl: mt8186: Fix 'reg-names' for pinctrl nodes

[Allen-KH Cheng]

There are 8 GPIO physical address bases in mt8186, corresponding to the
items of 'reg-names' with the pinctrl driver. but the order of
'reg-names' is not correct. The mt8186 pinctrl driver would get the
wrong address, causing the system to restart when regulator initializes
. we fix 'reg-names' for pinctrl nodes and the pinctrl-mt8186 example
in bindings.

Fixes: 338e953f1bd1 ("dt-bindings: pinctrl: mt8186: add pinctrl file and binding document")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
Signed-off-by: Guodong Liu <guodong.liu at mediatek.com>
---
 .../bindings/pinctrl/pinctrl-mt8186.yaml         | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
index 1eeb885ce0c6..604445e390a7 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
@@ -41,12 +41,12 @@ properties:
       Gpio base register names.
     items:
       - const: iocfg0
-      - const: iocfg_bm
-      - const: iocfg_bl
-      - const: iocfg_br
+      - const: iocfg_lt
       - const: iocfg_lm
+      - const: iocfg_lb
+      - const: iocfg_bl
       - const: iocfg_rb
-      - const: iocfg_tl
+      - const: iocfg_rt
       - const: eint
 
   interrupt-controller: true
@@ -232,12 +232,12 @@ examples:
             <0x10002200 0x0200>,
             <0x10002400 0x0200>,
             <0x10002600 0x0200>,
-            <0x10002A00 0x0200>,
+            <0x10002a00 0x0200>,
             <0x10002c00 0x0200>,
             <0x1000b000 0x1000>;
-      reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
-                  "iocfg_br", "iocfg_lm", "iocfg_rb",
-                  "iocfg_tl", "eint";
+      reg-names = "iocfg0", "iocfg_lt", "iocfg_lm",
+                  "iocfg_lb", "iocfg_bl", "iocfg_rb",
+                  "iocfg_rt", "eint";
       gpio-controller;
       #gpio-cells = <2>;
       gpio-ranges = <&pio 0 0 185>;
-- 
2.18.0