[PATCH v2 4/5] dt-bindings: iio: adc: stmpe: Remove node name requirement

[Jonathan Cameron]

On Tue, 9 Aug 2022 16:37:27 +0100
Lee Jones <lee.jones at linaro.org> wrote:

> On Tue, 09 Aug 2022, Francesco Dolcini wrote:
> 
> > Hello Jonathan, can you pick this? Patches 1 and 2 were applied to MFD
> > tree.  
> 
> Sending out nags whilst the merge-window is open is seldom helpful.

Agreed, next week would have been better.  I happen to be queuing stuff
up ready for a rebase this cycle though so applied this one to what will
be the togreg branch of iio.git after rc1 is available and I've rebased.

Jonathan

> 
> Also, please refrain from top-posting.
> 
> Thanks.
> 
> > On Tue, Jul 12, 2022 at 06:33:44PM +0200, Francesco Dolcini wrote:  
> > > STMPE driver does not require a specific node name anymore, only the
> > > compatible is checked, update binding according to this.
> > > 
> > > Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
> > > ---
> > >  Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +--
> > >  1 file changed, 1 insertion(+), 2 deletions(-)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
> > > index 9049c699152f..333744a2159c 100644
> > > --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
> > > +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
> > > @@ -13,8 +13,7 @@ description:
> > >    This ADC forms part of an ST microelectronics STMPE multifunction device .
> > >    The ADC is shared with the STMPE touchscreen. As a result some ADC related
> > >    settings are specified in the parent node.
> > > -  The node name myst be stmpe_adc and should be a child node of the stmpe node
> > > -  to which it belongs.
> > > +  The node should be a child node of the stmpe node to which it belongs.
> > >  
> > >  properties:
> > >    compatible:  
> >   
>