[PATCH v4 2/2] arm64: dts: imx8mp-msc-sm2s: Add device trees for MSC SM2S-IMX8PLUS SoM and carrier board

[Krzysztof Kozlowski]

On 12/08/2022 14:35, Martyn Welch wrote:
> On Fri, 2022-08-12 at 12:47 +0300, Krzysztof Kozlowski wrote:
>> On 12/08/2022 11:41, Martyn Welch wrote:
>>> Add device trees for one of a number of MSC's (parent company,
>>> Avnet)
>>> variants of the SM2S-IMX8PLUS system on module along with the
>>> compatible
>>> SM2S-SK-AL-EP1 carrier board. As the name suggests, this family of
>>> SoMs use
>>> the NXP i.MX8MP SoC and provide the SMARC module interface.
>>>
>>> Signed-off-by: Martyn Welch <martyn.welch at collabora.com>
>>> ---
>>>
>>> Changes in v2
>>>   - Added compatibles
>>>   - Removed underscores from node names
>>>   - Make node names more generic
>>>   - Reorder properties
>>>   - Fix issues found by dtbs_check in these files
>>>
>>> Changes in v3:
>>>   - Switched to avnet vendor string in compatibles
>>>   - Corrected patch description
>>>
>>> Changes in v4:
>>>   - Switched from phy-reset-gpios to reset-gpios, removing
>>> duplication
>>>   - Removed unneeded sdma1 node
>>>
>>>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>>>  .../freescale/imx8mp-msc-sm2s-14N0600E.dts    |  72 ++
>>>  .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     |  53 ++
>>>  .../boot/dts/freescale/imx8mp-msc-sm2s.dtsi   | 812
>>> ++++++++++++++++++
>>>  4 files changed, 938 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-
>>> 14N0600E.dts
>>>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-
>>> ep1.dts
>>>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-msc-
>>> sm2s.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/freescale/Makefile
>>> b/arch/arm64/boot/dts/freescale/Makefile
>>> index 8bf7f7ecebaa..139c8b95c9c9 100644
>>> --- a/arch/arm64/boot/dts/freescale/Makefile
>>> +++ b/arch/arm64/boot/dts/freescale/Makefile
>>> @@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-
>>> gw7902.dtb
>>>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
>>>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
>>>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
>>> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
>>>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
>>>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
>>>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
>>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-
>>> 14N0600E.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-
>>> 14N0600E.dts
>>> new file mode 100644
>>> index 000000000000..9e976e8baaee
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dts
>>> @@ -0,0 +1,72 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Copyright (C) 2022 Avnet Embedded GmbH
>>> + */
>>> +/dts-v1/;
>>> +
>>> +#include "imx8mp-msc-sm2s.dtsi"
>>> +
>>> +/ {
>>> +       model = "MSC SM2S-IMX8PLUS-QC6-14N0600E SoM";
>>> +       compatible = "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-
>>> imx8mp",
>>> +                    "fsl,imx8mp";
>>
>> This does not match your bindings. Please test your DTS.
>>
> 
> Hi Krzysztof,
> 
> I'm not sure I follow. This is the DTS for the SoM. 

SoMs usually do not have DTSes because they cannot be run on their own.
SoMs almost always require a baseboard/carrier. Therefore this should
not be DTS, but that was not my comment.

> The only way I can
> test the SoM at the moment is on combination with the "EP1" carrier
> board. 

... so you basically say it cannot be a DTS.

> That has been tested. The strings match those specified in the
> bindings unless I'm being blind to something.

Test the DTS - make dtbs_check (there are several
variations/arguments/helpers):
Documentation/devicetree/bindings/writing-schema.rst

> 
> I guess I can build the DTB for just the SoM 

But you just did it, didn't you? This is a DTS.

> and boot with that or
> thinking about it, rename this as a .dtsi, given that it's unlikely
> that anyone is going to have a carrier barebones enough that it could
> be considered just the SoM?

Anyway, I wanted DT bindings tests for DTS. Not actual tests on
hardware, because the compatibles do not matter in that aspect.

Best regards,
Krzysztof