[PATCH 6/8] phy: allwinner: phy-sun6i-mipi-dphy: Set enable bit last

[Samuel Holland]

The A100 variant of the DPHY requires configuring the analog registers
before setting the global enable bit. Since this order also works on the
other variants, always use it, to minimize the differences between them.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---

 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 625c6e1e9990..9698d68d0db7 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -183,10 +183,6 @@ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
 		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
 		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
 
-	regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
-		     SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
-		     SUN6I_DPHY_GCTL_EN);
-
 	regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
 		     SUN6I_DPHY_ANA0_REG_PWS |
 		     SUN6I_DPHY_ANA0_REG_DMPC |
@@ -244,6 +240,10 @@ static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
 			   SUN6I_DPHY_ANA2_EN_P2S_CPU_MASK,
 			   SUN6I_DPHY_ANA2_EN_P2S_CPU(lanes_mask));
 
+	regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
+		     SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
+		     SUN6I_DPHY_GCTL_EN);
+
 	return 0;
 }
 
-- 
2.35.1