[PATCH 3/3] ARM: dts: imx: align gpio-keys node names with dtschema
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Wed Aug 10 04:10:08 PDT 2022
The node names should be generic and DT schema expects certain pattern.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
arch/arm/boot/dts/imx23-xfi3.dts | 6 ++--
.../dts/imx25-eukrea-mbimxsd25-baseboard.dts | 4 +--
arch/arm/boot/dts/imx28-cfa10049.dts | 4 +--
.../arm/boot/dts/imx28-duckbill-2-enocean.dts | 2 +-
arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi | 8 ++---
.../dts/imx35-eukrea-mbimxsd35-baseboard.dts | 4 +--
arch/arm/boot/dts/imx50-kobo-aura.dts | 6 ++--
arch/arm/boot/dts/imx51-babbage.dts | 2 +-
arch/arm/boot/dts/imx53-ard.dts | 10 +++---
arch/arm/boot/dts/imx53-qsb-common.dtsi | 6 ++--
arch/arm/boot/dts/imx53-smd.dts | 4 +--
arch/arm/boot/dts/imx53-tx53.dtsi | 2 +-
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 8 ++---
arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi | 2 +-
arch/arm/boot/dts/imx6dl-prtmvt.dts | 32 +++++++++----------
arch/arm/boot/dts/imx6dl-prtvt7.dts | 30 ++++++++---------
arch/arm/boot/dts/imx6dl-victgo.dts | 4 +--
arch/arm/boot/dts/imx6q-novena.dts | 2 +-
arch/arm/boot/dts/imx6q-pistachio.dts | 2 +-
arch/arm/boot/dts/imx6q-utilite-pro.dts | 2 +-
.../arm/boot/dts/imx6q-var-dt6customboard.dts | 6 ++--
arch/arm/boot/dts/imx7d-sdb.dts | 4 +--
22 files changed, 75 insertions(+), 75 deletions(-)
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
index a6213c590f94..b1d8210f3ecc 100644
--- a/arch/arm/boot/dts/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -158,19 +158,19 @@ backlight {
default-brightness-level = <6>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- voldown {
+ key-voldown {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio2 7 0>;
debounce-interval = <20>;
};
- volup {
+ key-volup {
label = "volume-up";
linux,code = <115>;
gpios = <&gpio2 8 0>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index 3f38c2e60a74..c7207ea437c4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -13,12 +13,12 @@ / {
model = "Eukrea MBIMXSD25";
compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
- bp1 {
+ button {
label = "BP1";
gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index ff1b450c0717..9ef0d567ea48 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -388,12 +388,12 @@ dac0: dh2228 at 2 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&rotary_btn_pins_cfa10049>;
- rotary_button {
+ rotary-button {
label = "rotary_button";
gpios = <&gpio3 26 1>;
debounce-interval = <10>;
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
index bacb846f99e3..73f521c46c1e 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -204,7 +204,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&enocean_button>;
- enocean {
+ key-enocean {
label = "EnOcean";
linux,code = <KEY_NEW>;
gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
index 3280fddaaf0d..b285a946e2c2 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -19,12 +19,12 @@ backlight {
default-brightness-level = <10>;
};
- button-sw3 {
+ gpio-keys-0 {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
- sw3 {
+ switch-sw3 {
label = "SW3";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
@@ -32,12 +32,12 @@ sw3 {
};
};
- button-sw4 {
+ gpio-keys-1 {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
- sw4 {
+ switch-sw4 {
label = "SW4";
gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index b1c11170ac25..7f4f812b0811 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -13,12 +13,12 @@ / {
model = "Eukrea CPUIMX35";
compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bp1>;
- bp1 {
+ button {
label = "BP1";
gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
index 82ce8c43be86..51bf6117fb12 100644
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -38,20 +38,20 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
- hallsensor {
+ event-hallsensor {
label = "Hallsensor";
gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESERVED>;
linux,input-type = <EV_SW>;
};
- frontlight {
+ event-frontlight {
label = "Frontlight";
gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DISPLAYTOGGLE>;
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 552196d8a60a..a1f9c6a72275 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -154,7 +154,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 6208fbb2e741..23a7492e2929 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -61,34 +61,34 @@ reg_3p3v: regulator at 0 {
gpio-keys {
compatible = "gpio-keys";
- home {
+ key-home {
label = "Home";
gpios = <&gpio5 10 0>;
linux,code = <KEY_HOME>;
wakeup-source;
};
- back {
+ key-back {
label = "Back";
gpios = <&gpio5 11 0>;
linux,code = <KEY_BACK>;
wakeup-source;
};
- program {
+ key-program {
label = "Program";
gpios = <&gpio5 12 0>;
linux,code = <KEY_PROGRAM >;
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio5 13 0>;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio4 0 0>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index d6a87c0c2934..50fef8dd3675 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -45,20 +45,20 @@ display_out: endpoint {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 9be44e807188..f8d17967a67e 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -19,13 +19,13 @@ memory at 70000000 {
gpio-keys {
compatible = "gpio-keys";
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio2 14 0>;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio2 15 0>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 8712e9851465..892dd1a4bac3 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -81,7 +81,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_key>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
linux,code = <116>; /* KEY_POWER */
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index d9de9b4f0c52..d477a937b47a 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -6,7 +6,7 @@ / {
keyboard {
compatible = "gpio-keys";
- btn0 {
+ button-0 {
gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
label = "btn0";
linux,code = <KEY_WAKEUP>;
@@ -14,7 +14,7 @@ btn0 {
wakeup-source;
};
- btn1 {
+ button-1 {
gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
label = "btn1";
linux,code = <KEY_WAKEUP>;
@@ -22,7 +22,7 @@ btn1 {
wakeup-source;
};
- btn2 {
+ button-2 {
gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
label = "btn2";
linux,code = <KEY_WAKEUP>;
@@ -30,7 +30,7 @@ btn2 {
wakeup-source;
};
- btn3 {
+ button-3 {
gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
label = "btn3";
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
index ec5b66453156..337db29b0010 100644
--- a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
+++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
@@ -188,7 +188,7 @@ power-button {
rotary-encoder-key {
compatible = "gpio-keys";
- rotary-encoder-press {
+ rotary-encoder-event {
label = "rotary-encoder press";
gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_ENTER>;
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts
index a35a1c66e770..1f8cddd83ccb 100644
--- a/arch/arm/boot/dts/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts
@@ -51,98 +51,98 @@ gpio-keys {
pinctrl-0 = <&pinctrl_gpiokeys>;
autorepeat;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- f1 {
+ key-f1 {
label = "GPIO Key F1";
linux,code = <KEY_F1>;
gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
};
- f2 {
+ key-f2 {
label = "GPIO Key F2";
linux,code = <KEY_F2>;
gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
};
- f3 {
+ key-f3 {
label = "GPIO Key F3";
linux,code = <KEY_F3>;
gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
};
- f4 {
+ key-f4 {
label = "GPIO Key F4";
linux,code = <KEY_F4>;
gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
};
- f5 {
+ key-f5 {
label = "GPIO Key F5";
linux,code = <KEY_F5>;
gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
};
- cycle {
+ key-cycle {
label = "GPIO Key CYCLE";
linux,code = <KEY_CYCLEWINDOWS>;
gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
};
- esc {
+ key-esc {
label = "GPIO Key ESC";
linux,code = <KEY_ESC>;
gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
};
- up {
+ key-up {
label = "GPIO Key UP";
linux,code = <KEY_UP>;
gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
};
- down {
+ key-down {
label = "GPIO Key DOWN";
linux,code = <KEY_DOWN>;
gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
};
- ok {
+ key-ok {
label = "GPIO Key OK";
linux,code = <KEY_OK>;
gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
};
- f6 {
+ key-f6 {
label = "GPIO Key F6";
linux,code = <KEY_F6>;
gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
};
- f7 {
+ key-f7 {
label = "GPIO Key F7";
linux,code = <KEY_F7>;
gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
};
- f8 {
+ key-f8 {
label = "GPIO Key F8";
linux,code = <KEY_F8>;
gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
};
- f9 {
+ key-f9 {
label = "GPIO Key F9";
linux,code = <KEY_F9>;
gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
};
- f10 {
+ key-f10 {
label = "GPIO Key F10";
linux,code = <KEY_F10>;
gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index 0a0b7acddfb2..a1eb53851794 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -62,91 +62,91 @@ keys {
compatible = "gpio-keys";
autorepeat;
- esc {
+ key-esc {
label = "GPIO Key ESC";
linux,code = <KEY_ESC>;
gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
};
- up {
+ key-up {
label = "GPIO Key UP";
linux,code = <KEY_UP>;
gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
};
- down {
+ key-down {
label = "GPIO Key DOWN";
linux,code = <KEY_DOWN>;
gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
};
- enter {
+ key-enter {
label = "GPIO Key Enter";
linux,code = <KEY_ENTER>;
gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
};
- cycle {
+ key-cycle {
label = "GPIO Key CYCLE";
linux,code = <KEY_CYCLEWINDOWS>;
gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
};
- f1 {
+ key-f1 {
label = "GPIO Key F1";
linux,code = <KEY_F1>;
gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
};
- f2 {
+ key-f2 {
label = "GPIO Key F2";
linux,code = <KEY_F2>;
gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
};
- f3 {
+ key-f3 {
label = "GPIO Key F3";
linux,code = <KEY_F3>;
gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
};
- f4 {
+ key-f4 {
label = "GPIO Key F4";
linux,code = <KEY_F4>;
gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
};
- f5 {
+ key-f5 {
label = "GPIO Key F5";
linux,code = <KEY_F5>;
gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
};
- f6 {
+ key-f6 {
label = "GPIO Key F6";
linux,code = <KEY_F6>;
gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
};
- f7 {
+ key-f7 {
label = "GPIO Key F7";
linux,code = <KEY_F7>;
gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
};
- f8 {
+ key-f8 {
label = "GPIO Key F8";
linux,code = <KEY_F8>;
gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
};
- f9 {
+ key-f9 {
label = "GPIO Key F9";
linux,code = <KEY_F9>;
gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
};
- f10 {
+ key-f10 {
label = "GPIO Key F10";
linux,code = <KEY_F10>;
gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index 779b52858a25..72df1dba83be 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -18,14 +18,14 @@ gpio-keys {
pinctrl-0 = <&pinctrl_gpiokeys>;
autorepeat;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- enter {
+ key-enter {
label = "Rotary Key";
gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
linux,code = <KEY_ENTER>;
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index f8a8dd3e069f..ee8c0bd3ecfd 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -86,7 +86,7 @@ user-button {
linux,code = <KEY_POWER>;
};
- lid {
+ lid-event {
label = "Lid";
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index 7a33e54cc0f1..bad8d831e64e 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -100,7 +100,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
wakeup-source;
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index d16ff2083d62..ad59b23ef27a 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -89,7 +89,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ key-power {
label = "Power Button";
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index 63550351340d..2290c1237634 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -28,7 +28,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- back {
+ key-back {
gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
label = "Key Back";
@@ -37,7 +37,7 @@ back {
wakeup-source;
};
- home {
+ key-home {
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
label = "Key Home";
@@ -46,7 +46,7 @@ home {
wakeup-source;
};
- menu {
+ key-menu {
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
label = "Key Menu";
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 7eadd7617943..04c2dd5ea5cf 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -24,14 +24,14 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
--
2.34.1
More information about the linux-arm-kernel
mailing list