[PATCH V4 0/7] imx: blk-ctrl: Add interconnect for i.MX8MP

[Peng Fan]

Hi Shawn,

Ping..

Thanks,
Peng.

On 7/8/2022 4:56 PM, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> V4:
>   Because the header is not included when adding NoC node, the fsl,imx8mp.h
>   needs be included in this patchset. So include it in patch 6
> 
> V3:
>   Move adding NoC node patch to i.MX8MP ICC driver patchset
>   Per Lucas's comments, warn once when icc bulk get not return probe defer and continue.
> 
> V2:
>   Use a low bandwidth value instead INT_MAX
>   Minor fix to move fsl,imx8mp.h out to dts patch, not driver patch
>   Add A-b tag from DT maintainer
> 
> i.MX8MP NoC settings is invalid after related power domain up. So
> need to set valid values after power domain up.
> 
> This patchset is to bind interconnect for each entry in blk ctrl.
> 
> This patchset is not include DVFS DDRC feature.
> 
> Peng Fan (7):
>    dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk
>      ctrl
>    dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk
>      ctrl
>    dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk
>      ctrl
>    soc: imx: add icc paths for i.MX8MP media blk ctrl
>    soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
>    arm64: dts: imx8mp: add interconnects for media blk ctrl
>    arm64: dts: imx8mp: add interconnect for hsio blk ctrl
> 
>   .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml     |  9 +++++
>   .../soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml     | 10 +++++
>   .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml    | 14 +++++++
>   arch/arm64/boot/dts/freescale/imx8mp.dtsi     | 18 +++++++++
>   drivers/soc/imx/imx8m-blk-ctrl.c              | 39 +++++++++++++++++++
>   drivers/soc/imx/imx8mp-blk-ctrl.c             | 35 +++++++++++++++++
>   6 files changed, 125 insertions(+)
>