[PATCH v4 2/2] arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node

[Roger Quadros]

The ELM module is used for GPMC NAND accesses for detecting
and correcting errors during reads due to NAND bitflips errors.

4-, 8-, and 16-bit error-correction levels are supported using
the BCH (Bose-ChaudhurI-Hocquenghem) algorithm.

Signed-off-by: Roger Quadros <rogerq at kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 9 +++++++++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts  | 4 ++++
 arch/arm64/boot/dts/ti/k3-am642-sk.dts   | 4 ++++
 3 files changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 0059de0aeedf..c1caa7c7c6eb 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1327,4 +1327,13 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	elm0: ecc at 25010000 {
+		compatible = "ti,am64-elm";
+		reg = <0x00 0x25010000 0x00 0x2000>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 54 0>;
+		clock-names = "fck";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 30647fc3eec2..abc0fe61b6b8 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -680,3 +680,7 @@
 &gpmc0 {
 	status = "disabled";
 };
+
+&elm0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index bd9b36b16787..bec1edfeef37 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -597,3 +597,7 @@
 &gpmc0 {
 	status = "disabled";
 };
+
+&elm0 {
+	status = "disabled";
+};
-- 
2.17.1