[PATCH v2 04/11] gunyah: Common types and error codes for Gunyah hypercalls

[Dmitry Baryshkov]

On 02/08/2022 00:12, Elliot Berman wrote:
> Add architecture-independent standard error codes, types, and macros for
> Gunyah hypercalls.
> 
> Signed-off-by: Elliot Berman <quic_eberman at quicinc.com>
> ---
>   MAINTAINERS            |  1 +
>   include/linux/gunyah.h | 75 ++++++++++++++++++++++++++++++++++++++++++
>   2 files changed, 76 insertions(+)
>   create mode 100644 include/linux/gunyah.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 02f97ac90cdf..2e4f1d9ed47b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8744,6 +8744,7 @@ S:	Maintained
>   F:	Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml
>   F:	Documentation/virt/gunyah/
>   F:	arch/arm64/include/asm/gunyah.h
> +F:	include/linux/gunyah.h
>   
>   HABANALABS PCI DRIVER
>   M:	Oded Gabbay <ogabbay at kernel.org>
> diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h
> new file mode 100644
> index 000000000000..69931a0f5736
> --- /dev/null
> +++ b/include/linux/gunyah.h
> @@ -0,0 +1,75 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#ifndef _GUNYAH_H
> +#define _GUNYAH_H
> +
> +#include <linux/types.h>
> +#include <linux/errno.h>
> +#include <asm/gunyah.h>
> +
> +typedef u64 gh_capid_t;
> +
> +/* Common Gunyah macros */
> +#define GH_CAPID_INVAL	U64_MAX
> +
> +#define GH_ERROR_OK			0

Is there any semantic difference between GH_ERROR_foo < 0 and 
GH_ERROR_bar > 0 ?

> +#define GH_ERROR_UNIMPLEMENTED		-1
> +#define GH_ERROR_RETRY			-2
> +
> +#define GH_ERROR_ARG_INVAL		1
> +#define GH_ERROR_ARG_SIZE		2
> +#define GH_ERROR_ARG_ALIGN		3
> +
> +#define GH_ERROR_NOMEM			10
> +
> +#define GH_ERROR_ADDR_OVFL		20
> +#define GH_ERROR_ADDR_UNFL		21
> +#define GH_ERROR_ADDR_INVAL		22
> +
> +#define GH_ERROR_DENIED			30
> +#define GH_ERROR_BUSY			31
> +#define GH_ERROR_IDLE			32
> +
> +#define GH_ERROR_IRQ_BOUND		40
> +#define GH_ERROR_IRQ_UNBOUND		41
> +
> +#define GH_ERROR_CSPACE_CAP_NULL	50
> +#define GH_ERROR_CSPACE_CAP_REVOKED	51
> +#define GH_ERROR_CSPACE_WRONG_OBJ_TYPE	52
> +#define GH_ERROR_CSPACE_INSUF_RIGHTS	53
> +#define GH_ERROR_CSPACE_FULL		54
> +
> +#define GH_ERROR_MSGQUEUE_EMPTY		60
> +#define GH_ERROR_MSGQUEUE_FULL		61
> +
> +static inline int gh_remap_error(int gh_error)
> +{
> +	switch (gh_error) {
> +	case GH_ERROR_OK:
> +		return 0;
> +	case GH_ERROR_NOMEM:
> +		return -ENOMEM;
> +	case GH_ERROR_DENIED:
> +	case GH_ERROR_CSPACE_CAP_NULL:
> +	case GH_ERROR_CSPACE_CAP_REVOKED:
> +	case GH_ERROR_CSPACE_WRONG_OBJ_TYPE:
> +	case GH_ERROR_CSPACE_INSUF_RIGHTS:
> +	case GH_ERROR_CSPACE_FULL:
> +		return -EACCES;
> +	case GH_ERROR_BUSY:
> +	case GH_ERROR_IDLE:
> +		return -EBUSY;
> +	case GH_ERROR_IRQ_BOUND:
> +	case GH_ERROR_IRQ_UNBOUND:
> +	case GH_ERROR_MSGQUEUE_FULL:
> +	case GH_ERROR_MSGQUEUE_EMPTY:
> +		return -EPERM;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +#endif


-- 
With best wishes
Dmitry