[PATCH v2 9/9] arm64: dts: fsd: drop useless 'dma-channels/requests' properties

[Krzysztof Kozlowski]

The pl330 DMA controller provides number of DMA channels and requests
through its registers, so duplicating this information (with a chance of
mistakes) in DTS is pointless.  Additionally the DTS used always wrong
property names which causes DT schema check failures - the bindings
documented 'dma-channels' and 'dma-requests' properties without leading
hash sign.

Reported-by: Rob Herring <robh at kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/tesla/fsd.dtsi | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index 10c217a57a7d..af39655331de 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -432,8 +432,6 @@ mdma0: dma-controller at 10100000 {
 			reg = <0x0 0x10100000 0x0 0x1000>;
 			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 			clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>;
 			clock-names = "apb_pclk";
 			iommus = <&smmu_imem 0x800 0x0>;
@@ -444,8 +442,6 @@ mdma1: dma-controller at 10110000 {
 			reg = <0x0 0x10110000 0x0 0x1000>;
 			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 			clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>;
 			clock-names = "apb_pclk";
 			iommus = <&smmu_imem 0x801 0x0>;
@@ -456,8 +452,6 @@ pdma0: dma-controller at 14280000 {
 			reg = <0x0 0x14280000 0x0 0x1000>;
 			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 			clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>;
 			clock-names = "apb_pclk";
 			iommus = <&smmu_peric 0x2 0x0>;
@@ -468,8 +462,6 @@ pdma1: dma-controller at 14290000 {
 			reg = <0x0 0x14290000 0x0 0x1000>;
 			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 			clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>;
 			clock-names = "apb_pclk";
 			iommus = <&smmu_peric 0x1 0x0>;
-- 
2.32.0