[PATCH 2/2] dt-bindings: mmc: brcm,sdhci-brcmstb: cleanup example

[Krzysztof Kozlowski]

Cleanup indentation and order of entries in example DTS.  The most
important when reading the DTS are compatible and reg.  By convention
they are usually to first entries.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 .../bindings/mmc/brcm,sdhci-brcmstb.yaml       | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
index 54a0edab5f8c..b672202fff4e 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -65,15 +65,15 @@ unevaluatedProperties: false
 examples:
   - |
     mmc at 84b0000 {
-      sd-uhs-sdr50;
-      sd-uhs-ddr50;
-      sd-uhs-sdr104;
-      sdhci,auto-cmd12;
       compatible = "brcm,bcm7216-sdhci",
                    "brcm,bcm7445-sdhci",
                    "brcm,sdhci-brcmstb";
       reg = <0x84b0000 0x260>, <0x84b0300 0x200>;
       reg-names = "host", "cfg";
+      sd-uhs-sdr50;
+      sd-uhs-ddr50;
+      sd-uhs-sdr104;
+      sdhci,auto-cmd12;
       interrupts = <0x0 0x26 0x4>;
       interrupt-names = "sdio0_0";
       clocks = <&scmi_clk 245>;
@@ -81,6 +81,11 @@ examples:
     };
 
     mmc at 84b1000 {
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
+      reg-names = "host", "cfg";
       mmc-ddr-1_8v;
       mmc-hs200-1_8v;
       mmc-hs400-1_8v;
@@ -88,11 +93,6 @@ examples:
       supports-cqe;
       non-removable;
       bus-width = <0x8>;
-      compatible = "brcm,bcm7216-sdhci",
-           "brcm,bcm7445-sdhci",
-            "brcm,sdhci-brcmstb";
-      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
-      reg-names = "host", "cfg";
       interrupts = <0x0 0x27 0x4>;
       interrupt-names = "sdio1_0";
       clocks = <&scmi_clk 245>;
-- 
2.32.0