[PATCH v2 3/4] dt-bindings: mmc: Add Broadcom optional sdio_freq clock

[Kamal Dasu]

The 72116B0 has improved SDIO controllers that allow the max clock
rate to be increased from a max of 100MHz to a max of 150MHz.
Optional "sdio_freq" clock is used to drive the bus clock if present
optional property "max-frequency" specifies a base clock frequency
in Hz that overrides the base clock frequency in the CAPS registers.

Signed-off-by: Kamal Dasu <kdasu.kdev at gmail.com>
---
 .../bindings/mmc/brcm,sdhci-brcmstb.yaml      | 24 +++++++++++++++----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
index dccd5ad96981..bf716c0cf096 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -10,8 +10,6 @@ maintainers:
   - Al Cooper <alcooperx at gmail.com>
   - Florian Fainelli <f.fainelli at gmail.com>
 
-allOf:
-  - $ref: mmc-controller.yaml#
 
 properties:
   compatible:
@@ -42,23 +40,39 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
-    description:
-      handle to core clock for the sdhci controller.
+    minItems: 1
+    items:
+      - description: handle to core clock for the sdhci controller
+      - description: improved 150Mhz clock for sdhci controller (Optional clock)
 
   clock-names:
+    minItems: 1
     items:
       - const: sw_sdio
+      - const: sdio_freq # Optional clock
 
   sdhci,auto-cmd12:
     type: boolean
     description: Specifies that controller should use auto CMD12
 
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        clock-names:
+          contains:
+            const: sdio_freq
+
+  - then:
+      required:
+        - max-frequency
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
+  - clock-names
 
 unevaluatedProperties: false
 
-- 
2.17.1