[PATCH v2 03/14] ARM: dts: imx6ull-colibri: add phy-supply to fec

[Marcel Ziswiler]

From: Philippe Schenker <philippe.schenker at toradex.com>

This adds the proper phy-supply to the FEC. This supply is actually
switched by a clock that is now properly stated. This has the advantage
to add a delay for that particular regulator which is needed.

Signed-off-by: Philippe Schenker <philippe.schenker at toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov at toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---

(no changes since v1)

 arch/arm/boot/dts/imx6ull-colibri.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index bea00cfaa820..e619da3b00b3 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -47,6 +47,18 @@ reg_sd1_vmmc: regulator-sd1-vmmc {
 		states = <1800000 0x1 3300000 0x0>;
 		vin-supply = <&reg_module_3v3>;
 	};
+
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed-clock";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "+V3.3_ETH";
+		regulator-type = "voltage";
+		vin-supply = <&reg_module_3v3>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+		startup-delay-us = <150000>;
+	};
 };
 
 &adc1 {
@@ -81,6 +93,7 @@ &fec2 {
 	pinctrl-1 = <&pinctrl_enet2_sleep>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_eth_phy>;
 	status = "okay";
 
 	mdio {
-- 
2.35.1