[PATCH v3 1/2] cpufreq: CPPC: Add per_cpu efficiency_class

Pierre Gondois pierre.gondois at arm.com
Mon Apr 25 05:38:07 PDT 2022


From: Pierre Gondois <Pierre.Gondois at arm.com>

In ACPI, describing power efficiency of CPUs can be done through the
following arm specific field:
ACPI 6.4, s5.2.12.14 'GIC CPU Interface (GICC) Structure',
'Processor Power Efficiency Class field':
  Describes the relative power efficiency of the associated pro-
  cessor. Lower efficiency class numbers are more efficient than
  higher ones (e.g. efficiency class 0 should be treated as more
  efficient than efficiency class 1). However, absolute values
  of this number have no meaning: 2 isn’t necessarily half as
  efficient as 1.

The efficiency_class field is stored in the GicC structure of the
ACPI MADT table and it's currently supported in Linux for arm64 only.
Thus, this new functionality is introduced for arm64 only.

To allow the cppc_cpufreq driver to know and preprocess the
efficiency_class values of all the CPUs, add a per_cpu efficiency_class
variable to store them.

At least 2 different efficiency classes must be present,
otherwise there is no use in creating an Energy Model.

The efficiency_class values are squeezed in [0:#efficiency_class-1]
while conserving the order. For instance, efficiency classes of:
  [111, 212, 250]
will be mapped to:
  [0 (was 111), 1 (was 212), 2 (was 250)].

Each policy being independently registered in the driver, populating
the per_cpu efficiency_class is done only once at the driver
initialization. This prevents from having each policy re-searching the
efficiency_class values of other CPUs. The EM will be registered in a
following patch.

The patch also exports acpi_cpu_get_madt_gicc() to fetch the GicC
structure of the ACPI MADT table for each CPU.

Acked-by: Catalin Marinas <catalin.marinas at arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois at arm.com>
---
 arch/arm64/kernel/smp.c        |  1 +
 drivers/cpufreq/cppc_cpufreq.c | 42 ++++++++++++++++++++++++++++++++++
 2 files changed, 43 insertions(+)

diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 3b46041f2b97..62ed361a4376 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -512,6 +512,7 @@ struct acpi_madt_generic_interrupt *acpi_cpu_get_madt_gicc(int cpu)
 {
 	return &cpu_madt_gicc[cpu];
 }
+EXPORT_SYMBOL_GPL(acpi_cpu_get_madt_gicc);
 
 /*
  * acpi_map_gic_cpu_interface - parse processor MADT entry
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index 82d370ae6a4a..3cd05651707d 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -420,12 +420,53 @@ static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu)
 	return cppc_get_transition_latency(cpu) / NSEC_PER_USEC;
 }
 
+static DEFINE_PER_CPU(unsigned int, efficiency_class);
+
+static int populate_efficiency_class(void)
+{
+	struct acpi_madt_generic_interrupt *gicc;
+	DECLARE_BITMAP(used_classes, 256) = {};
+	int class, cpu, index;
+
+	for_each_possible_cpu(cpu) {
+		gicc = acpi_cpu_get_madt_gicc(cpu);
+		class = gicc->efficiency_class;
+		bitmap_set(used_classes, class, 1);
+	}
+
+	if (bitmap_weight(used_classes, 256) <= 1) {
+		pr_debug("Efficiency classes are all equal (=%d). "
+			"No EM registered", class);
+		return -EINVAL;
+	}
+
+	/*
+	 * Squeeze efficiency class values on [0:#efficiency_class-1].
+	 * Values are per spec in [0:255].
+	 */
+	index = 0;
+	for_each_set_bit(class, used_classes, 256) {
+		for_each_possible_cpu(cpu) {
+			gicc = acpi_cpu_get_madt_gicc(cpu);
+			if (gicc->efficiency_class == class)
+				per_cpu(efficiency_class, cpu) = index;
+		}
+		index++;
+	}
+
+	return 0;
+}
+
 #else
 
 static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu)
 {
 	return cppc_get_transition_latency(cpu) / NSEC_PER_USEC;
 }
+static int populate_efficiency_class(void)
+{
+	return 0;
+}
 #endif
 
 
@@ -742,6 +783,7 @@ static int __init cppc_cpufreq_init(void)
 
 	cppc_check_hisi_workaround();
 	cppc_freq_invariance_init();
+	populate_efficiency_class();
 
 	ret = cpufreq_register_driver(&cppc_cpufreq_driver);
 	if (ret)
-- 
2.25.1




More information about the linux-arm-kernel mailing list