[PATCH 2/8] dt-bindings: nvmem: sfp: Add clock properties

[Sean Anderson]

On 4/22/22 9:36 AM, Rob Herring wrote:
> On Thu, 21 Apr 2022 13:56:51 -0400, Sean Anderson wrote:
>> To program fuses, it is necessary to set the fuse programming time. This
>> is determined based on the value of the platform clock. Add a clock
>> property.
>> 
>> Signed-off-by: Sean Anderson <sean.anderson at seco.com>
>> ---
>> 
>>  .../bindings/nvmem/fsl,layerscape-sfp.yaml         | 14 ++++++++++++++
>>  1 file changed, 14 insertions(+)
>> 
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/
> 
> 
> efuse at 1e80000: 'clock-names' is a required property
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb
> 
> efuse at 1e80000: 'clocks' is a required property
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb
> 

This is fixed in 4/8, but I have ordered dt bindings changes first as
required by Documentation/devicetree/bindings/submitting-patches.html

--Sean