[PATCH 3/6] firmware: ti_sci: Introduce Power Management Ops
Dave Gerlach
d-gerlach at ti.com
Thu Apr 21 13:36:56 PDT 2022
Introduce power management ops to the ti_sci driver and add a single
prepare_sleep op that is used by the kernel suspend layer to provide
details to firmware about the state being entered.
Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
---
drivers/firmware/ti_sci.c | 62 ++++++++++++++++++++++++++
drivers/firmware/ti_sci.h | 32 ++++++++++++-
include/linux/soc/ti/ti_sci_protocol.h | 6 +++
3 files changed, 99 insertions(+), 1 deletion(-)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index ebc32bbd9b83..4b0f747251c8 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -1667,6 +1667,65 @@ static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle,
return ret;
}
+/**
+ * ti_sci_cmd_prepare_sleep() - Prepare system for system suspend
+ * @handle: pointer to TI SCI handle
+ * @mode: Device identifier
+ * @ctx_lo: Low part of address for context save
+ * @ctx_hi: High part of address for context save
+ * @debug_flags: Debug flags to pass to firmware
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_prepare_sleep(const struct ti_sci_handle *handle, u8 mode,
+ u32 ctx_lo, u32 ctx_hi, u32 debug_flags)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_prepare_sleep *req;
+ struct ti_sci_msg_hdr *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_PREPARE_SLEEP,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+
+ req = (struct ti_sci_msg_req_prepare_sleep *)xfer->xfer_buf;
+ req->mode = mode;
+ req->ctx_lo = ctx_lo;
+ req->ctx_hi = ctx_hi;
+ req->debug_flags = debug_flags;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+ ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
{
struct ti_sci_info *info;
@@ -2808,6 +2867,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
struct ti_sci_core_ops *core_ops = &ops->core_ops;
struct ti_sci_dev_ops *dops = &ops->dev_ops;
struct ti_sci_clk_ops *cops = &ops->clk_ops;
+ struct ti_sci_pm_ops *pmops = &ops->pm_ops;
struct ti_sci_rm_core_ops *rm_core_ops = &ops->rm_core_ops;
struct ti_sci_rm_irq_ops *iops = &ops->rm_irq_ops;
struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops;
@@ -2847,6 +2907,8 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
cops->set_freq = ti_sci_cmd_clk_set_freq;
cops->get_freq = ti_sci_cmd_clk_get_freq;
+ pmops->prepare_sleep = ti_sci_cmd_prepare_sleep;
+
rm_core_ops->get_range = ti_sci_cmd_get_resource_range;
rm_core_ops->get_range_from_shost =
ti_sci_cmd_get_resource_range_from_shost;
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index ef3a8214d002..439e15ec54db 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -6,7 +6,7 @@
* The system works in a message response protocol
* See: http://processors.wiki.ti.com/index.php/TISCI for details
*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2015-2022 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef __TI_SCI_H
@@ -35,6 +35,9 @@
#define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d
#define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e
+/* Low Power Mode Requests */
+#define TI_SCI_MSG_PREPARE_SLEEP 0x0300
+
/* Resource Management Requests */
#define TI_SCI_MSG_GET_RESOURCE_RANGE 0x1500
@@ -545,6 +548,33 @@ struct ti_sci_msg_resp_get_clock_freq {
u64 freq_hz;
} __packed;
+#define TISCI_MSG_VALUE_SLEEP_MODE_DEEP_SLEEP 0x0
+#define TISCI_MSG_VALUE_SLEEP_MODE_MCU_ONLY 0x1
+#define TISCI_MSG_VALUE_SLEEP_MODE_STANDBY 0x2
+
+/**
+ * struct tisci_msg_prepare_sleep_req - Request for TISCI_MSG_PREPARE_SLEEP.
+ *
+ * @hdr TISCI header to provide ACK/NAK flags to the host.
+ * @mode Low power mode to enter.
+ * @ctx_lo Low 32-bits of physical pointer to address to use for context save.
+ * @ctx_hi High 32-bits of physical pointer to address to use for context save.
+ * @debug_flags Flags that can be set to halt the sequence during suspend or
+ * resume to allow JTAG connection and debug.
+ *
+ * This message is used as the first step of entering a low power mode. It
+ * allows configurable information, including which state to enter to be
+ * easily shared from the application, as this is a non-secure message and
+ * therefore can be sent by anyone.
+ */
+struct ti_sci_msg_req_prepare_sleep {
+ struct ti_sci_msg_hdr hdr;
+ u8 mode;
+ u32 ctx_lo;
+ u32 ctx_hi;
+ u32 debug_flags;
+} __packed;
+
#define TI_SCI_IRQ_SECONDARY_HOST_INVALID 0xff
/**
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index bd0d11af76c5..8adcb45d4b5c 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -195,6 +195,11 @@ struct ti_sci_clk_ops {
u64 *current_freq);
};
+struct ti_sci_pm_ops {
+ int (*prepare_sleep)(const struct ti_sci_handle *handle, u8 mode,
+ u32 ctx_lo, u32 ctx_hi, u32 flags);
+};
+
/**
* struct ti_sci_resource_desc - Description of TI SCI resource instance range.
* @start: Start index of the first resource range.
@@ -539,6 +544,7 @@ struct ti_sci_ops {
struct ti_sci_core_ops core_ops;
struct ti_sci_dev_ops dev_ops;
struct ti_sci_clk_ops clk_ops;
+ struct ti_sci_pm_ops pm_ops;
struct ti_sci_rm_core_ops rm_core_ops;
struct ti_sci_rm_irq_ops rm_irq_ops;
struct ti_sci_rm_ringacc_ops rm_ring_ops;
--
2.35.0
More information about the linux-arm-kernel
mailing list