[PATCH 07/10] crypto: Use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN

[Arnd Bergmann]

On Thu, Apr 21, 2022 at 4:44 PM Catalin Marinas <catalin.marinas at arm.com> wrote:
> On Thu, Apr 21, 2022 at 03:47:30PM +0200, Arnd Bergmann wrote:
> > On Thu, Apr 21, 2022 at 3:25 PM Catalin Marinas <catalin.marinas at arm.com> wrote:
> > > On Thu, Apr 21, 2022 at 02:28:45PM +0200, Arnd Bergmann wrote:
> > > > We also know that larger slabs are all cacheline aligned, so simply
> > > > comparing the transfer size is enough to rule out most, in this case
> > > > any transfer larger than 96 bytes must come from the kmalloc-128
> > > > or larger cache, so that works like before.
> > >
> > > There's also the case with 128-byte cache lines and kmalloc-192.
> >
> > Sure, but that's much less common, as the few machines with 128 byte
> > cache lines tend to also have cache coherent devices IIRC, so we'd
> > skip the bounce buffer entirely.
>
> Do you know which machines still have 128-byte cache lines _and_
> non-coherent DMA? If there isn't any that matters, I'd reduce
> ARCH_DMA_MINALIGN to 64 now (while trying to get to even smaller kmalloc
> caches).

I think the last time this came up, someone pointed out one of the
Qualcomm Snapdragon phone chips with their custom cores.

        Arnd