[PATCH 07/10] crypto: Use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN

[Arnd Bergmann]

On Thu, Apr 21, 2022 at 3:25 PM Catalin Marinas <catalin.marinas at arm.com> wrote:
> On Thu, Apr 21, 2022 at 02:28:45PM +0200, Arnd Bergmann wrote:
> > We also know that larger slabs are all cacheline aligned, so simply
> > comparing the transfer size is enough to rule out most, in this case
> > any transfer larger than 96 bytes must come from the kmalloc-128
> > or larger cache, so that works like before.
>
> There's also the case with 128-byte cache lines and kmalloc-192.

Sure, but that's much less common, as the few machines with 128 byte
cache lines tend to also have cache coherent devices IIRC, so we'd
skip the bounce buffer entirely.

> > For transfers <=96 bytes, the possibilities are:
> >
> > 1.kmalloc-32 or smaller, always needs to bounce
> > 2. kmalloc-96, but at least one byte in partial cache line,
> >     need to bounce
> > 3. kmalloc-64, may skip the bounce.
> > 4. kmalloc-128 or larger, or not a slab cache but a partial
> >     transfer, may skip the bounce.
> >
> > I would guess that the first case is the most common here,
> > so unless bouncing one or two cache lines is extremely
> > expensive, I don't expect it to be worth optimizing for the latter
> > two cases.
>
> I think so. If someone complains of a performance regression, we can
> look at optimising the bounce. I have a suspicion the cost of copying
> two cache lines is small compared to swiotlb_find_slots() etc.

That is possible, and we'd definitely have to watch out for
performance regressions, I'm just skeptical that the cases that
suffer from the extra bouncer buffering on 33..64 byte allocations
benefit much from having a special case if the 1...32 and 65..96
byte allocations are still slow.

Another simpler way to do this might be to just not create the
kmalloc-96 (or kmalloc-192) caches, and assuming that any
transfer >=33 (or 65) bytes is safe.

       Arnd