[EXT] Re: [PATCH 1/2 v4] dt-bindings: dspi: added for semtech sx1301

[Jerry Huang]

Best Regards
Jerry Huang

-----Original Message-----
From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> 
Sent: 2022年4月20日 20:06
To: Jerry Huang <jerry.huang at nxp.com>; broonie at kernel.org; robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org; linux-spi at vger.kernel.org; devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; shawnguo at kernel.org; Leo Li <leoyang.li at nxp.com>; linux-arm-kernel at lists.infradead.org
Subject: [EXT] Re: [PATCH 1/2 v4] dt-bindings: dspi: added for semtech sx1301

Caution: EXT Email

On 20/04/2022 09:31, Changming Huang wrote:
> Add DT Binding doc for semtech sx1301
>
> Signed-off-by: Changming Huang <jerry.huang at nxp.com>
> ---
> changes in v4:
>   - rename example node, adjust description changes in v3:
>   - add the dt-bindings
>
>  .../bindings/spi/semtech,sx1301.yaml          | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/spi/semtech,sx1301.yaml
>
> diff --git a/Documentation/devicetree/bindings/spi/semtech,sx1301.yaml 
> b/Documentation/devicetree/bindings/spi/semtech,sx1301.yaml
> new file mode 100644
> index 000000000000..420fe8d23a1e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/semtech,sx1301.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: 
> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> +cetree.org%2Fschemas%2Fspi%2Fsemtech%2Csx1301.yaml%23&data=05%7C0
> +1%7Cjerry.huang%40nxp.com%7C5fe40f1226344390810c08da22c629cc%7C686ea1
> +d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637860531744722352%7CUnknown%7CT
> +WFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVC
> +I6Mn0%3D%7C3000%7C%7C%7C&sdata=22w71yaEE9QdRNdIzaNr5NcfGbTVbh0lNB
> +btch1n4e4%3D&reserved=0
> +$schema: 
> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Cjerry.hua
> +ng%40nxp.com%7C5fe40f1226344390810c08da22c629cc%7C686ea1d3bc2b4c6fa92
> +cd99c5c301635%7C0%7C0%7C637860531744722352%7CUnknown%7CTWFpbGZsb3d8ey
> +JWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C30
> +00%7C%7C%7C&sdata=3XpGR4clLkzdKDh%2Fi26i4LQuuAYJ7E9%2Fv34lKn7%2Fa
> +4o%3D&reserved=0
> +
> +title: Semtech sx1301 SPI controller bindings

This is still wrong.

Please also answer Michael's comments.

[Jerry Huang] I double checked the MikroBus devices, we used two MikcroBus devices:
BLE P click: https://www.mikroe.com/ble-p-click
BEE click: https://www.mikroe.com/bee-click 
Both of them are SPI interface connect to ls1028ardb through MiKcroBus interface.
So the name "semtech sx1301" is not correct for this node.

How about "mikroe, spi-dev" or any suggestion about it?


Best regards,
Krzysztof