[PATCH 1/2 v3] dt-bindings: dspi: added for semtech sx1301

[Michael Walle]

> Add DT Binding doc for semtech sx1301

Please be a bit more elaborate. The sx1301 seems to be an
SPI device, some kind of WAN device.

> 
> Signed-off-by: Changming Huang <jerry.huang at nxp.com>
> ---
> changes in v3:
>   - add the dt-bindings
> 
>  .../bindings/spi/semtech,sx1301.yaml          | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/semtech,sx1301.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/semtech,sx1301.yaml b/Documentation/devicetree/bindings/spi/semtech,sx1301.yaml
> new file mode 100644
> index 000000000000..f65fb5809218
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/semtech,sx1301.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/semtech,sx1301.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Semtech sx1301 devicetree bindings
> +
> +allOf:
> +  - $ref: "spi-controller.yaml"

.. then why does it inherit the spi controllers properties?

Also *some* kind of information what the sx1301 is would be nice.

Anyway, I was about to comment on your patch 2. But maybe I'll
just leave it here. On the RDB there is a mikrobus connector, with
this, you are going to say "hey there is always a sx1301" module
there. What happens if it not there? What if you put another module
in that socket?

Maybe Krzystof knows better. But it really looks like you want to
have device tree overlays here instead of hardcoding exactly one
use case.

-michael

> +
> +maintainers:
> +  - Changming Huang <jerry.huang at nxp.com>
> +
> +properties:
> +  compatible:
> +    const: semtech,sx1301
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-max-frequency: true
> +
> +  fsl,spi-cs-sck-delay: true
> +
> +  fsl,spi-sck-cs-delay: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - spi-max-frequency
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mikrobus at 0 {
> +      compatible = "semtech,sx1301";
> +      reg = <0>;
> +      spi-max-frequency = <2000000>;
> +      fsl,spi-cs-sck-delay = <1000000>;
> +      fsl,spi-sck-cs-delay = <50>;
> +    };
> +
> +...
> -- 
> 2.25.1
> 
>