[PATCH] iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()

[Robin Murphy]

On 2022-04-19 22:01, Nicolin Chen wrote:
> The arm_smmu_mm_invalidate_range function is designed to be called
> by mm core for Shared Virtual Addressing purpose between IOMMU and
> CPU MMU. However, the ways of two subsystems defining their "end"
> addresses are slightly different. IOMMU defines its "end" address
> using the last address of an address range, while mm core defines
> that using the following address of an address range:
> 
> 	include/linux/mm_types.h:
> 		unsigned long vm_end;
> 		/* The first byte after our end address ...
> 
> This mismatch resulted in an incorrect calculation for size so it
> failed to be page-size aligned. Further, it caused a dead loop at
> "while (iova < end)" check in __arm_smmu_tlb_inv_range function.
> 
> This patch fixes the issue by doing the calculation correctly.

Reviewed-by: Robin Murphy <robin.murphy at arm.com>

> Fixes: 2f7e8c553e98d ("iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops")
> Cc: stable at vger.kernel.org
> Signed-off-by: Nicolin Chen <nicolinc at nvidia.com>
> ---
>   drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 9 ++++++++-
>   1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> index 22ddd05bbdcd..c623dae1e115 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> @@ -183,7 +183,14 @@ static void arm_smmu_mm_invalidate_range(struct mmu_notifier *mn,
>   {
>   	struct arm_smmu_mmu_notifier *smmu_mn = mn_to_smmu(mn);
>   	struct arm_smmu_domain *smmu_domain = smmu_mn->domain;
> -	size_t size = end - start + 1;
> +	size_t size;
> +
> +	/*
> +	 * The mm_types defines vm_end as the first byte after the end address,
> +	 * different from IOMMU subsystem using the last address of an address
> +	 * range. So do a simple translation here by calculating size correctly.
> +	 */
> +	size = end - start;
>   
>   	if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_BTM))
>   		arm_smmu_tlb_inv_range_asid(start, size, smmu_mn->cd->asid,