[PATCH 2/3] ARM: dts: stm32: add stm32mp1 pwr voltage regulator

[Alexandre TORGUE]

Hi Steffen

On 4/14/22 12:06, Steffen Trumtrar wrote:
> Add the devicetree binding for the STM32MP1 PWR voltage regulator.
> Currently there is only a devicetree binding for this peripheral in the
> mainline kernel and no driver.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> ---
>   arch/arm/boot/dts/stm32mp151.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index d8327298e2be..1816d9b02bb8 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1181,6 +1181,14 @@ pwr_mcu: pwr_mcu at 50001014 {
>   			reg = <0x50001014 0x4>;
>   		};
>   
> +		pwr_irq: pwr at 50001020 {

label not used

> +			compatible = "st,stm32mp1-pwr";
> +			reg = <0x50001020 0x100>;
> +			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +		};
> +

PWR irqchip has been pushed on kernel.org ?

regards
Alex

>   		exti: interrupt-controller at 5000d000 {
>   			compatible = "st,stm32mp1-exti", "syscon";
>   			interrupt-controller;