[PATCH v1 00/17] protonic fixes

[Shawn Guo]

On Tue, Apr 12, 2022 at 09:39:47AM +0200, Oleksij Rempel wrote:
> This patch series provide two main part of changes:
> - Remove prototype specific deprecated code not used in production.
> - Unify vicut1 and victgo variants to reduce maintaining overhead.
> 
> David Jander (16):
>   arm: dts: imx6qdl-vicut1.dtsi: remove TiWi module
>   arm: dts: imx6qdl-vicut1.dtsi: Put nON_SWITCH in own pinctrl grp
>   arm: dts: imx6qdl-vicut1.dtsi: Remove PCIe
>   arm: dts: imx6qdl-vicut1/victgo: Remove UART2
>   arm: dts: imx6qdl-vicut1.dtsi: Fix LED names
>   arm: dts: imx6qdl-vicut1.dtsi: Fix debug LED gpio pins
>   arm: dts: imx6qdl-vicut1.dtsi: Update GPIO line names
>   arm: dts: imx6qdl-vicut1.dtsi: Remove conflicting pinctrl entry
>   arm: dts: imx6q-vicut1.dts: remove sata node
>   arm: dts: imx6dl-victgo.dts: update gpio names
>   arm: dts: imx6dl-victgo.dts: Factor out common parts to
>     imx6qdl-victgo.dtsi
>   arm: dts: imx6qdl-vicut1.dtsi: Move some node out to DTS files
>   arm: dts: Remove imx6qdl-victgo.dtsi
>   arm: dts: imx6qdl-vicut1: Factor out common parts of 12inch board
>     variants
>   arm: dts: imx6dl-victgo.dts: Remove touchscreen x axis inversion
>   arm: dts: imx6qdl-vicut1.dtsi: Add missing ISB led node
> 
> Oleksij Rempel (1):
>   arm: dts: imx6qdl-vicut1.dtsi: add thermal zone and attach tmp103 to
>     it.

s/arm:/ARM: in patch subject.

Shawn

> 
>  arch/arm/boot/dts/imx6dl-victgo.dts          | 682 +------------------
>  arch/arm/boot/dts/imx6dl-vicut1.dts          |   1 +
>  arch/arm/boot/dts/imx6q-vicut1.dts           |   5 +-
>  arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi | 128 ++++
>  arch/arm/boot/dts/imx6qdl-vicut1.dtsi        | 222 +-----
>  arch/arm/boot/dts/imx6qp-vicutp.dts          |   1 +
>  6 files changed, 178 insertions(+), 861 deletions(-)
>  create mode 100644 arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
> 
> -- 
> 2.30.2
>