[EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio
Joy Zou
joy.zou at nxp.com
Sun Apr 17 21:06:50 PDT 2022
Hi Vinod,
-----Original Message-----
From: Vinod Koul <vkoul at kernel.org>
Sent: 2021年10月25日 12:45
To: Joy Zou <joy.zou at nxp.com>
Cc: Robin Gong <yibin.gong at nxp.com>; shawnguo at kernel.org; s.hauer at pengutronix.de; kernel at pengutronix.de; festevam at gmail.com; dl-linux-imx <linux-imx at nxp.com>; dmaengine at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org
Subject: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio
Caution: EXT Email
On 21-10-21, 13:16, Joy Zou wrote:
> Add hdmi audio support in sdma.
Pls send a series together and chained. They appear here as disjoint patches
The audio and dma patches always are separate. The audio driver owner will send audio patches
after the dma patches are accepted.
>
> Signed-off-by: Joy Zou <joy.zou at nxp.com>
> ---
> drivers/dma/imx-sdma.c | 38 +++++++++++++++++++++------
> include/linux/platform_data/dma-imx.h | 1 +
> 2 files changed, 31 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index
> cacc725ca545..3a0e408f7741 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -907,7 +907,10 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
> desc = sdmac->desc;
> if (desc) {
> if (sdmac->flags & IMX_DMA_SG_LOOP) {
> - sdma_update_channel_loop(sdmac);
> + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI)
> + sdma_update_channel_loop(sdmac);
> + else
> +
> + vchan_cyclic_callback(&desc->vd);
> } else {
> mxc_sdma_handle_channel_normal(sdmac);
> vchan_cookie_complete(&desc->vd); @@
> -1023,6 +1026,10 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
> case IMX_DMATYPE_IPU_MEMORY:
> emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr;
> break;
> + case IMX_DMATYPE_HDMI:
> + emi_2_per = sdma->script_addrs->hdmi_dma_addr;
> + sdmac->is_ram_script = true;
> + break;
> default:
> break;
> }
> @@ -1070,11 +1077,16 @@ static int sdma_load_context(struct sdma_channel *sdmac)
> /* Send by context the event mask,base address for peripheral
> * and watermark level
> */
> - context->gReg[0] = sdmac->event_mask[1];
> - context->gReg[1] = sdmac->event_mask[0];
> - context->gReg[2] = sdmac->per_addr;
> - context->gReg[6] = sdmac->shp_addr;
> - context->gReg[7] = sdmac->watermark_level;
> + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> + context->gReg[4] = sdmac->per_addr;
> + context->gReg[6] = sdmac->shp_addr;
> + } else {
> + context->gReg[0] = sdmac->event_mask[1];
> + context->gReg[1] = sdmac->event_mask[0];
> + context->gReg[2] = sdmac->per_addr;
> + context->gReg[6] = sdmac->shp_addr;
> + context->gReg[7] = sdmac->watermark_level;
> + }
>
> bd0->mode.command = C0_SETDM;
> bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD; @@ -1420,7
> +1432,7 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
> desc->sdmac = sdmac;
> desc->num_bd = bds;
>
> - if (sdma_alloc_bd(desc))
> + if (bds && sdma_alloc_bd(desc))
> goto err_desc_out;
>
> /* No slave_config called in MEMCPY case, so do here */ @@
> -1585,13 +1597,16 @@ static struct dma_async_tx_descriptor
> *sdma_prep_dma_cyclic( {
> struct sdma_channel *sdmac = to_sdma_chan(chan);
> struct sdma_engine *sdma = sdmac->sdma;
> - int num_periods = buf_len / period_len;
> + int num_periods = 0;
> int channel = sdmac->channel;
> int i = 0, buf = 0;
> struct sdma_desc *desc;
>
> dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel);
>
> + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI)
> + num_periods = buf_len / period_len;
> +
> sdma_config_write(chan, &sdmac->slave_config, direction);
>
> desc = sdma_transfer_init(sdmac, direction, num_periods); @@
> -1608,6 +1623,9 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
> goto err_bd_out;
> }
>
> + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI)
> + return vchan_tx_prep(&sdmac->vc, &desc->vd, flags);
> +
> while (buf < buf_len) {
> struct sdma_buffer_descriptor *bd = &desc->bd[i];
> int param;
> @@ -1668,6 +1686,10 @@ static int sdma_config_write(struct dma_chan *chan,
> sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) &
> SDMA_WATERMARK_LEVEL_HWML;
> sdmac->word_size = dmaengine_cfg->dst_addr_width;
> + } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> + sdmac->per_address = dmaengine_cfg->dst_addr;
> + sdmac->per_address2 = dmaengine_cfg->src_addr;
> + sdmac->watermark_level = 0;
> } else {
> sdmac->per_address = dmaengine_cfg->dst_addr;
> sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
You missed adding cyclic capability, pls add that
The design of hdmi script achieves the cyclic capability and is different from common script.
> diff --git a/include/linux/platform_data/dma-imx.h
> b/include/linux/platform_data/dma-imx.h
> index 281adbb26e6b..29ac21d40f28 100644
> --- a/include/linux/platform_data/dma-imx.h
> +++ b/include/linux/platform_data/dma-imx.h
> @@ -39,6 +39,7 @@ enum sdma_peripheral_type {
> IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */
> IMX_DMATYPE_ASRC_SP, /* Shared ASRC */
> IMX_DMATYPE_SAI, /* SAI */
> + IMX_DMATYPE_HDMI, /* HDMI Audio */
Why is this in latform_data, these should be moved to include/dt-bindings
Just follow the previous way. It can be moved to include/dt-bindings, but it may affect the old
imx platform.
Thanks！
BR
Joy Zou
--
~Vinod
More information about the linux-arm-kernel
mailing list