[PATCH V3 13/15] arm64: dts: mediatek: Add opp table and clock property for MT8183 cpufreq

[Rex-BC Chen]

On Fri, 2022-04-15 at 14:24 +0200, AngeloGioacchino Del Regno wrote:
> Il 15/04/22 07:59, Rex-BC Chen ha scritto:
> > - Add cpufreq opp table.
> > - Add MediaTek cci opp table.
> > - Add property of opp table and clock fro cpufreq.
> > 
> > Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng at mediatek.com>
> > Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8183-evb.dts |  32 +++
> >   arch/arm64/boot/dts/mediatek/mt8183.dtsi    | 270
> > ++++++++++++++++++++
> >   2 files changed, 302 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > index f3fd3cca23e9..8953dbf84f3e 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> 
> ..snip..
> 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index 4b08691ed39e..4ae3305d16d2 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -42,6 +42,244 @@
> >   		rdma1 = &rdma1;
> >   	};
> >   
> > +	cluster0_opp: cluster_opp_table0 {
> 
> Please don't use underscores in devicetree for anything that's not a
> phandle.
> 
> 	cluster0_opp: cluster0-opp-table {
> 
> > +		compatible = "operating-points-v2";
> > +		opp-shared;
> > +		opp0_00 {
> 
> Apart from the underscore being invalid, across the kernel, you can
> find many
> instances of opp tables, containing names related to the frequencies,
> so, for
> consistency (this is not a rule!), perhaps it would be a good idea to
> do so.
> 
> 		opp-793000000 {
> 
> > +			opp-hz = /bits/ 64 <793000000>;
> > +			opp-microvolt = <650000>;
> > +			required-opps = <&opp2_00>;
> > +		};
> > +		opp0_01 {
> 
> 		opp-910000000 {
> 
> > +			opp-hz = /bits/ 64 <910000000>;
> > +			opp-microvolt = <687500>;
> > +			required-opps = <&opp2_01>;
> > +		};
> > +		opp0_02 {
> 
> ..snip..
> 
> > +		opp0_15 {
> > +			opp-hz = /bits/ 64 <1989000000>;
> > +			opp-microvolt = <1050000>;
> > +			required-opps = <&opp2_15>;
> 
> P.S.: Please fix the typo below!
> 
> > +		};	};
> > +
> > +
> 
> ...also...
> 
> > +	cci_opp: opp_table2 {
> 
> 	cci_opp: cci-opp-table {
> 
> > +		compatible = "operating-points-v2";
> > +		opp-shared;
> > +		opp2_00: opp-273000000 {
> 
> This one is fine instead :))
> 
> Cheers,
> Angelo

Hello Angelo,

OK, I will modify this issue in next version.
Thanks!

BRs,
Rex