[PATCH v4 06/45] media: sun6i-csi: Use runtime pm for clocks and reset

Paul Kocialkowski paul.kocialkowski at bootlin.com
Fri Apr 15 08:27:32 PDT 2022


Wrap the clock and reset preparation into runtime pm functions
for better organization of the code. Also fix the clock and
reset enable order to first deassert reset, as recommended in
Allwinner litterature.

Make the driver depend on PM while at it since runtime pm is
mandatory for the driver to work.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
---
 .../media/platform/sunxi/sun6i-csi/Kconfig    |  2 +-
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      | 84 +++++++++++++------
 2 files changed, 60 insertions(+), 26 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun6i-csi/Kconfig b/drivers/media/platform/sunxi/sun6i-csi/Kconfig
index 0345901617d4..965fbd937841 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/Kconfig
+++ b/drivers/media/platform/sunxi/sun6i-csi/Kconfig
@@ -2,7 +2,7 @@
 config VIDEO_SUN6I_CSI
 	tristate "Allwinner V3s Camera Sensor Interface driver"
 	depends on V4L_PLATFORM_DRIVERS
-	depends on VIDEO_DEV && COMMON_CLK  && HAS_DMA
+	depends on VIDEO_DEV && COMMON_CLK  && HAS_DMA && PM
 	depends on ARCH_SUNXI || COMPILE_TEST
 	select MEDIA_CONTROLLER
 	select VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index 46d92b925cc8..dcc9e7a125e2 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -152,40 +152,18 @@ int sun6i_csi_set_power(struct sun6i_csi_device *csi_dev, bool enable)
 
 	if (!enable) {
 		regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, 0);
+		pm_runtime_put(dev);
 
-		clk_disable_unprepare(csi_dev->clock_ram);
-		clk_disable_unprepare(csi_dev->clock_mod);
-		reset_control_assert(csi_dev->reset);
 		return 0;
 	}
 
-	ret = clk_prepare_enable(csi_dev->clock_mod);
-	if (ret) {
-		dev_err(csi_dev->dev, "Enable csi clk err %d\n", ret);
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
 		return ret;
-	}
-
-	ret = clk_prepare_enable(csi_dev->clock_ram);
-	if (ret) {
-		dev_err(csi_dev->dev, "Enable clk_dram_csi clk err %d\n", ret);
-		goto clk_mod_disable;
-	}
-
-	ret = reset_control_deassert(csi_dev->reset);
-	if (ret) {
-		dev_err(csi_dev->dev, "reset err %d\n", ret);
-		goto clk_ram_disable;
-	}
 
 	regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, CSI_EN_CSI_EN);
 
 	return 0;
-
-clk_ram_disable:
-	clk_disable_unprepare(csi_dev->clock_ram);
-clk_mod_disable:
-	clk_disable_unprepare(csi_dev->clock_mod);
-	return ret;
 }
 
 static enum csi_input_fmt get_csi_input_format(struct sun6i_csi_device *csi_dev,
@@ -800,6 +778,56 @@ static irqreturn_t sun6i_csi_interrupt(int irq, void *private)
 	return IRQ_HANDLED;
 }
 
+static int sun6i_csi_suspend(struct device *dev)
+{
+	struct sun6i_csi_device *csi_dev = dev_get_drvdata(dev);
+
+	reset_control_assert(csi_dev->reset);
+	clk_disable_unprepare(csi_dev->clock_ram);
+	clk_disable_unprepare(csi_dev->clock_mod);
+
+	return 0;
+}
+
+static int sun6i_csi_resume(struct device *dev)
+{
+	struct sun6i_csi_device *csi_dev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = reset_control_deassert(csi_dev->reset);
+	if (ret) {
+		dev_err(dev, "failed to deassert reset\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(csi_dev->clock_mod);
+	if (ret) {
+		dev_err(dev, "failed to enable module clock\n");
+		goto error_reset;
+	}
+
+	ret = clk_prepare_enable(csi_dev->clock_ram);
+	if (ret) {
+		dev_err(dev, "failed to enable ram clock\n");
+		goto error_clock_mod;
+	}
+
+	return 0;
+
+error_clock_mod:
+	clk_disable_unprepare(csi_dev->clock_mod);
+
+error_reset:
+	reset_control_assert(csi_dev->reset);
+
+	return ret;
+}
+
+static const struct dev_pm_ops sun6i_csi_pm_ops = {
+	.runtime_suspend	= sun6i_csi_suspend,
+	.runtime_resume		= sun6i_csi_resume,
+};
+
 static const struct regmap_config sun6i_csi_regmap_config = {
 	.reg_bits       = 32,
 	.reg_stride     = 4,
@@ -879,6 +907,10 @@ static int sun6i_csi_resources_setup(struct sun6i_csi_device *csi_dev,
 		goto error_clock_rate_exclusive;
 	}
 
+	/* Runtime PM */
+
+	pm_runtime_enable(dev);
+
 	return 0;
 
 error_clock_rate_exclusive:
@@ -889,6 +921,7 @@ static int sun6i_csi_resources_setup(struct sun6i_csi_device *csi_dev,
 
 static void sun6i_csi_resources_cleanup(struct sun6i_csi_device *csi_dev)
 {
+	pm_runtime_disable(csi_dev->dev);
 	clk_rate_exclusive_put(csi_dev->clock_mod);
 }
 
@@ -971,6 +1004,7 @@ static struct platform_driver sun6i_csi_platform_driver = {
 	.driver	= {
 		.name		= SUN6I_CSI_NAME,
 		.of_match_table	= of_match_ptr(sun6i_csi_of_match),
+		.pm		= &sun6i_csi_pm_ops,
 	},
 };
 
-- 
2.35.2




More information about the linux-arm-kernel mailing list