[PATCH V3 03/15] cpufreq: mediatek: Replace old_* with pre_*
Rex-BC Chen
rex-bc.chen at mediatek.com
Thu Apr 14 22:59:04 PDT 2022
To make driver more readable, replace old_* with pre_*.
Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
---
drivers/cpufreq/mediatek-cpufreq.c | 84 +++++++++++++++---------------
1 file changed, 42 insertions(+), 42 deletions(-)
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index e040f3574af9..ff27f77e8ee6 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -61,18 +61,18 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
{
struct regulator *proc_reg = info->proc_reg;
struct regulator *sram_reg = info->sram_reg;
- int old_vproc, old_vsram, new_vsram, vsram, vproc, ret;
+ int pre_vproc, pre_vsram, new_vsram, vsram, vproc, ret;
- old_vproc = regulator_get_voltage(proc_reg);
- if (old_vproc < 0) {
+ pre_vproc = regulator_get_voltage(proc_reg);
+ if (pre_vproc < 0) {
dev_err(info->cpu_dev,
- "invalid Vproc value: %d\n", old_vproc);
- return old_vproc;
+ "invalid Vproc value: %d\n", pre_vproc);
+ return pre_vproc;
}
/* Vsram should not exceed the maximum allowed voltage of SoC. */
new_vsram = min(new_vproc + MIN_VOLT_SHIFT, MAX_VOLT_LIMIT);
- if (old_vproc < new_vproc) {
+ if (pre_vproc < new_vproc) {
/*
* When scaling up voltages, Vsram and Vproc scale up step
* by step. At each step, set Vsram to (Vproc + 200mV) first,
@@ -80,20 +80,20 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
* Keep doing it until Vsram and Vproc hit target voltages.
*/
do {
- old_vsram = regulator_get_voltage(sram_reg);
- if (old_vsram < 0) {
+ pre_vsram = regulator_get_voltage(sram_reg);
+ if (pre_vsram < 0) {
dev_err(info->cpu_dev,
- "invalid Vsram value: %d\n", old_vsram);
- return old_vsram;
+ "invalid Vsram value: %d\n", pre_vsram);
+ return pre_vsram;
}
- old_vproc = regulator_get_voltage(proc_reg);
- if (old_vproc < 0) {
+ pre_vproc = regulator_get_voltage(proc_reg);
+ if (pre_vproc < 0) {
dev_err(info->cpu_dev,
- "invalid Vproc value: %d\n", old_vproc);
- return old_vproc;
+ "invalid Vproc value: %d\n", pre_vproc);
+ return pre_vproc;
}
- vsram = min(new_vsram, old_vproc + MAX_VOLT_SHIFT);
+ vsram = min(new_vsram, pre_vproc + MAX_VOLT_SHIFT);
if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) {
vsram = MAX_VOLT_LIMIT;
@@ -122,12 +122,12 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
ret = regulator_set_voltage(proc_reg, vproc,
vproc + VOLT_TOL);
if (ret) {
- regulator_set_voltage(sram_reg, old_vsram,
- old_vsram);
+ regulator_set_voltage(sram_reg, pre_vsram,
+ pre_vsram);
return ret;
}
} while (vproc < new_vproc || vsram < new_vsram);
- } else if (old_vproc > new_vproc) {
+ } else if (pre_vproc > new_vproc) {
/*
* When scaling down voltages, Vsram and Vproc scale down step
* by step. At each step, set Vproc to (Vsram - 200mV) first,
@@ -135,20 +135,20 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
* Keep doing it until Vsram and Vproc hit target voltages.
*/
do {
- old_vproc = regulator_get_voltage(proc_reg);
- if (old_vproc < 0) {
+ pre_vproc = regulator_get_voltage(proc_reg);
+ if (pre_vproc < 0) {
dev_err(info->cpu_dev,
- "invalid Vproc value: %d\n", old_vproc);
- return old_vproc;
+ "invalid Vproc value: %d\n", pre_vproc);
+ return pre_vproc;
}
- old_vsram = regulator_get_voltage(sram_reg);
- if (old_vsram < 0) {
+ pre_vsram = regulator_get_voltage(sram_reg);
+ if (pre_vsram < 0) {
dev_err(info->cpu_dev,
- "invalid Vsram value: %d\n", old_vsram);
- return old_vsram;
+ "invalid Vsram value: %d\n", pre_vsram);
+ return pre_vsram;
}
- vproc = max(new_vproc, old_vsram - MAX_VOLT_SHIFT);
+ vproc = max(new_vproc, pre_vsram - MAX_VOLT_SHIFT);
ret = regulator_set_voltage(proc_reg, vproc,
vproc + VOLT_TOL);
if (ret)
@@ -178,8 +178,8 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
}
if (ret) {
- regulator_set_voltage(proc_reg, old_vproc,
- old_vproc);
+ regulator_set_voltage(proc_reg, pre_vproc,
+ pre_vproc);
return ret;
}
} while (vproc > new_vproc + VOLT_TOL ||
@@ -207,16 +207,16 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
struct mtk_cpu_dvfs_info *info = policy->driver_data;
struct device *cpu_dev = info->cpu_dev;
struct dev_pm_opp *opp;
- long freq_hz, old_freq_hz;
- int vproc, old_vproc, inter_vproc, target_vproc, ret;
+ long freq_hz, pre_freq_hz;
+ int vproc, pre_vproc, inter_vproc, target_vproc, ret;
inter_vproc = info->intermediate_voltage;
- old_freq_hz = clk_get_rate(cpu_clk);
- old_vproc = regulator_get_voltage(info->proc_reg);
- if (old_vproc < 0) {
- dev_err(cpu_dev, "invalid Vproc value: %d\n", old_vproc);
- return old_vproc;
+ pre_freq_hz = clk_get_rate(cpu_clk);
+ pre_vproc = regulator_get_voltage(info->proc_reg);
+ if (pre_vproc < 0) {
+ dev_err(cpu_dev, "invalid Vproc value: %d\n", pre_vproc);
+ return pre_vproc;
}
freq_hz = freq_table[index].frequency * 1000;
@@ -235,12 +235,12 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
* current voltage, scale up voltage first.
*/
target_vproc = (inter_vproc > vproc) ? inter_vproc : vproc;
- if (old_vproc < target_vproc) {
+ if (pre_vproc < target_vproc) {
ret = mtk_cpufreq_set_voltage(info, target_vproc);
if (ret) {
dev_err(cpu_dev,
"cpu%d: failed to scale up voltage!\n", policy->cpu);
- mtk_cpufreq_set_voltage(info, old_vproc);
+ mtk_cpufreq_set_voltage(info, pre_vproc);
return ret;
}
}
@@ -250,7 +250,7 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
if (ret) {
dev_err(cpu_dev,
"cpu%d: failed to re-parent cpu clock!\n", policy->cpu);
- mtk_cpufreq_set_voltage(info, old_vproc);
+ mtk_cpufreq_set_voltage(info, pre_vproc);
WARN_ON(1);
return ret;
}
@@ -261,7 +261,7 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
dev_err(cpu_dev,
"cpu%d: failed to scale cpu clock rate!\n", policy->cpu);
clk_set_parent(cpu_clk, armpll);
- mtk_cpufreq_set_voltage(info, old_vproc);
+ mtk_cpufreq_set_voltage(info, pre_vproc);
return ret;
}
@@ -279,13 +279,13 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
* If the new voltage is lower than the intermediate voltage or the
* original voltage, scale down to the new voltage.
*/
- if (vproc < inter_vproc || vproc < old_vproc) {
+ if (vproc < inter_vproc || vproc < pre_vproc) {
ret = mtk_cpufreq_set_voltage(info, vproc);
if (ret) {
dev_err(cpu_dev,
"cpu%d: failed to scale down voltage!\n", policy->cpu);
clk_set_parent(cpu_clk, info->inter_clk);
- clk_set_rate(armpll, old_freq_hz);
+ clk_set_rate(armpll, pre_freq_hz);
clk_set_parent(cpu_clk, armpll);
return ret;
}
--
2.18.0
More information about the linux-arm-kernel
mailing list