[PATCH V2 1/2] remoteproc: elf_loader: skip segment with memsz as zero

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Per elf specification,
p_filesz: This member gives the number of bytes in the file image of
the segment; it may be zero.
p_memsz: This member gives the number of bytes in the memory image
of the segment; it may be zero.

There is a case that i.MX DSP firmware has segment with PT_LOAD and
p_memsz/p_filesz set to zero. Such segment needs to be ignored,
otherwize rproc_da_to_va would report error.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier at linaro.org>
---
 drivers/remoteproc/remoteproc_elf_loader.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index d635d19a5aa8..5a412d7b6e0b 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -181,7 +181,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
 		bool is_iomem = false;
 		void *ptr;
 
-		if (type != PT_LOAD)
+		if (type != PT_LOAD || !memsz)
 			continue;
 
 		dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
-- 
2.25.1