[PATCH v1 02/17] arm: dts: imx6qdl-vicut1.dtsi: Put nON_SWITCH in own pinctrl grp

[Oleksij Rempel]

From: David Jander <david at protonic.nl>

Unify nON_SWITCH pinctrl configuration with imx6dl-victgo.dts.

This patch is a preparation to reduce duplicated code between vicut1 and
victgo.

Signed-off-by: David Jander <david at protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index fe2685642bf1..32f7eb379e60 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -72,6 +72,8 @@ counter-2 {
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
 		power {
@@ -621,6 +623,13 @@ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
 		>;
 	};
 
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			/* ITU656_nRESET */
@@ -631,8 +640,6 @@ MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
 			/* CAM_nDETECT */
 			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
-			/* nON_SWITCH */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
 			/* ISB_IN1 */
 			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
 			/* ISB_nIN2 */
-- 
2.30.2