[PATCH 3/6] ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED

[Stefan Wahren]

From: Phil Elwell <phil at raspberrypi.com>

The red LED on the Raspberry Pi 3 B Plus is the power LED.
So fix the GPIO line name accordingly.

Fixes: 71c0cd2283f2 ("ARM: dts: bcm2837: Add Raspberry Pi 3 B+")
Signed-off-by: Phil Elwell <phil at raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index e12938baaf12..c263f5b48b96 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -45,7 +45,7 @@ expgpio: gpio {
 		#gpio-cells = <2>;
 		gpio-line-names = "BT_ON",
 				  "WL_ON",
-				  "STATUS_LED_R",
+				  "PWR_LED_R",
 				  "LAN_RUN",
 				  "",
 				  "CAM_GPIO0",
-- 
2.25.1