[PATCH v2 3/3] mips: dts: ralink: mt7621: remove defining gpio function for pin groups

Arınç ÜNAL arinc.unal at arinc9.com
Mon Apr 11 04:20:49 PDT 2022


All pin groups function as gpio unless set otherwise. Therefore, remove
this unnecessary binding.

Tested on UniElec U7621-06-16M on OpenWrt.

Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
---
v2: add "ralink:" to the commit summary

---
 arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts | 12 ------------
 arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 12 ------------
 2 files changed, 24 deletions(-)

diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
index 75f3b0425487..c307a0edb91f 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
@@ -97,18 +97,6 @@ &pcie {
 	status = "okay";
 };
 
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: state-default {
-		gpio-pinmux {
-			groups = "uart3", "wdt";
-			function = "gpio";
-		};
-	};
-};
-
 &gmac1 {
 	status = "okay";
 	phy-handle = <&ethphy4>;
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
index b427ae9e081f..8268d738e74f 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
@@ -81,18 +81,6 @@ &pcie {
 	status = "okay";
 };
 
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: state-default {
-		gpio-pinmux {
-			groups = "wdt";
-			function = "gpio";
-		};
-	};
-};
-
 &gmac1 {
 	status = "okay";
 	phy-handle = <&ethphy7>;
-- 
2.25.1




More information about the linux-arm-kernel mailing list