[PATCH] ARM: dts: Fix more boolean properties with values
Rob Herring
robh at kernel.org
Thu Apr 7 15:51:07 PDT 2022
Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.
It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Cc: Krzysztof Kozlowski <krzk+dt at kernel.org>
Cc: Nicolas Ferre <nicolas.ferre at microchip.com>
Cc: Alexandre Belloni <alexandre.belloni at bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea at microchip.com>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: "Benoît Cousson" <bcousson at baylibre.com>
Cc: Tony Lindgren <tony at atomide.com>
Cc: Andy Gross <agross at kernel.org>
Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-omap at vger.kernel.org
Cc: linux-arm-msm at vger.kernel.org
Signed-off-by: Rob Herring <robh at kernel.org>
---
arch/arm/boot/dts/at91-sam9_l9260.dts | 2 +-
arch/arm/boot/dts/imx28-ts4600.dts | 2 +-
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 4 ++--
arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 ++++----
4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
index 1e2a28c2f365..2fb51b9aca2a 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -101,7 +101,7 @@ pinctrl_board_mmc0: mmc0-board {
nand0: nand at 40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
- nand-on-flash-bbt = <1>;
+ nand-on-flash-bbt;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
index 097ec35c62d8..0d58da1c0cc5 100644
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -26,7 +26,7 @@ ssp0: spi at 80010000 {
pinctrl-0 = <&mmc0_4bit_pins_a
&mmc0_sck_cfg
&en_sd_pwr>;
- broken-cd = <1>;
+ broken-cd;
bus-width = <4>;
vmmc-supply = <®_vddio_sd0>;
status = "okay";
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index b4664ab00256..d3da8b1b473b 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -118,8 +118,8 @@ usb at 6,0 {
gpmc,device-width = <2>;
gpmc,wait-pin = <0>;
gpmc,burst-length = <4>;
- gpmc,cycle2cycle-samecsen = <1>;
- gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <45>;
gpmc,cs-wr-off-ns = <45>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 996f4458d9fc..8cb04aa8ed2f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -972,7 +972,7 @@ gmac0: ethernet at 37000000 {
snps,axi-config = <&stmmac_axi_setup>;
snps,pbl = <32>;
- snps,aal = <1>;
+ snps,aal;
qcom,nss-common = <&nss_common>;
qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -996,7 +996,7 @@ gmac1: ethernet at 37200000 {
snps,axi-config = <&stmmac_axi_setup>;
snps,pbl = <32>;
- snps,aal = <1>;
+ snps,aal;
qcom,nss-common = <&nss_common>;
qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -1020,7 +1020,7 @@ gmac2: ethernet at 37400000 {
snps,axi-config = <&stmmac_axi_setup>;
snps,pbl = <32>;
- snps,aal = <1>;
+ snps,aal;
qcom,nss-common = <&nss_common>;
qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -1044,7 +1044,7 @@ gmac3: ethernet at 37600000 {
snps,axi-config = <&stmmac_axi_setup>;
snps,pbl = <32>;
- snps,aal = <1>;
+ snps,aal;
qcom,nss-common = <&nss_common>;
qcom,qsgmii-csr = <&qsgmii_csr>;
--
2.32.0
More information about the linux-arm-kernel
mailing list